Parts & Accessories
Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
Replacement roller belt for Tacs roller trainers.
Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura. - Alloy clamp for mounting your own device on handlebar or stem - Lightweight and rustproof aluminum construction - Hex wrench required for instillation and removal - Clamp body has (1) M5 Thread hold in center - 22.2 mm-28.6 mm diameter range
- Replacement belt - Select model based on model/roller size and belt size
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
The Mag Riser Block 3 from Minoura lifts up your front wheel during a training session to be at a natural level. This block fits both MTB and Road bike tire widths. - Fits under front wheel to level the bike to get natural riding on training - Double grooved design fits your narrow or wide ties - Polyethylene material minimizes weight at 1/2 lb. - 8.6D X 4.7W X 2.75H (inches)
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
• Plastic riser block allows the position of front wheel at one of two heights
-The cadence sensor attaches to the chain stay on any bike using with plastic ties. -ANT+s wireless transmission technology. -Size: 3 x 3 x 1.5 cm Weight: 50 gr. -Crank arm magnet included.
CycleOps' Magnetic Remote Shifter is for use with CycleOps' standard Mag trainers. It allows you to adjust the resistance without leaving the saddle and fits on your stem or handlebars.
Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
The Gel Block is an indispensable accessory for perfecting your position on the bike and provides a more natural feel to your training. - Reduces vibrations on the handlebars for more comfortable training - Non-slip Elastogel insert ensures maximum stability and alignment of the front wheel - Suitable for road and MTB
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike
For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
• 35.5-inches x 79-inches • Black
This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost). Easy to set up to start right away with your training, this Thru Axle adapter is made from quality material to ensure an immediate setup and great protection to the threads of your bicycle frame. This unit does it all!
The Bkool speed & cadence sensor will make any trainer compatible with the Bkool Simulator. Using ANT+ & Bluetooth Smart wireless transmission, the sensor is also compatible with all ANT+/BLE bike computers and smart phones.
Connect your PC to CycleOps VirtualTraining.
Save Your Tires for Race Day Frequent trainer riders often find the tread on their rear wheel will wear down over time. We recommend using our trainer tires on our Saris indoor trainers. They are made of tough material that can stand up to hours and hours and hours of training. Product Features - 700c x 23 – 25 fits most road bikes. - Ultra-quiet and super-durable. - For use with an indoor trainer only.
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
Use CycleOps' Training Mat to protect your floors and carpets from bike grime, sweat, and trainer wear. Durable and water proof, the Training Mat helps keep your trainer from moving across the floor and it absorbs vibration and noise.
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
With this Tacx wireless ANT+ receiver for Android devices with a micro USB port, you can connect to devices that communicate via ANT+. For example a heart rate meter, speed and cadence sensor, sports watch, GPS device or bike computer. This enables you to keep track of your performance continually. It also allows you to link an ANT+ trainer to the Tacx Cycling app (tablet) or Tacx Training app (smartphone), or connect an older model Tacx trainer which only has ANT+ to your telephone, so you can train with the Tacx Training app and Tacx Cloud. The device you want to connect must have a micro USB port and Android 4.3 or higher. This ANT+ dongle is only compatible with devices that have USB On-The-Go.
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house. Dimensions: 1.8m x .9m
Protects the bicycle from sweat and avoids corrosions or rust. - Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish - Sits above the top-tube and can be adjusted for different bicycles - Washing-machine friendly
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party! - Non-slip surface keep you safe while in cycling cleats - Protects floors from sweat and bike grime - Water-repellent surface does what it was designed to do – keep sweat off your floor - Compress-ability ensures trainer stays put during intense efforts - Easily rolls up for storage - Cleans easily with soap and water - Absorbs noise and vibration - Enhances overall stability of any indoor trainer setup - 4mm (5/32?) thickness is optimal balance of support and storage
Kinetic's Trainer Mat is a simple necessity for any cyclist who cherishes a clean training environment. It keeps floors clean and sweat-free and reduces vibration. Durable closed-cell PVC foam means it will stand up to even the most intense training sessions.
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
- Remote control for CycleOps VirtualTraining to allow the rider to change the ride view, mark intervals, pause and virtually change gears when using with 400 series or Phantom 5 Indoor Cycle. - Compatible with tablet and mobile devices via Bluetooth Smart only (iPad 3 or newer, iPhone 4s or newer.) - Compatible with PC via ANT+ or Bluetooth Smart (Bluetooth Smart connection Windows 8 or ANT+ connection requires ANT+ dongle/antenna.)
- Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise.
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. This axle will replace the R.A.T. axle found on all Cervelo R.A.T. equipped bikes. In addition to this axle, we include our replacement derailleur hanger with traditional threads. This axle combined with the replacement derailleur hanger will provide a complete threaded thru-axle system. Our derailleur hanger matches the geometry and construction of the stock derailleur hanger in every way for crisp shifting performance. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Look, your child is destined for greatness. We won't dispute that. But, why wait until they can walk for them to rock their awesomeness? If they're crawling, they're ready to explore the world. Attach the Strider Rocking Base to a Strider 12 Bike and get them rocking. The rocking base doesn't just familiarize them with a bike, the rocking motion helps develop their balance, spatial awareness, and core strength. No batteries. No annoying sounds. Just pure, rocking fun. - Compatible with the Strider 12 Classic, Sport, and Pro Balance Bikes - When the Strider 12" Bike is attached this product is intended for ages 6 months – 5 years old for Strider Sport and Pro, and ages 6 months – 3 years for Strider Classic.
Whether mashing or spinning, riding in the saddle or out, KICKR’s AXIS feet let cyclists of all types customize the ride feel, enhance feedback and offer a more realistic training experience to match their unique riding style. - Active feedback - A tuned ride - Reduce fatigue, go longer - KICKR AXIS feet create a realistic ride feel providing up to 5 degrees of side-to-side movement.
- Sram XD and XDR freehub for Direct Drive trainers (Drivo and Direto's family, Suito, Turno, Kura, Turbo Roteo and Volano). - Compatible with 12 speed cassette.
Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer. - Reads data based on the type of trainer used. - Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices. - When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
The Training Mat is the finishing touch to your training area. Placed between the home trainer and the floor, it improves comfort and protects your home from oil, dirt, and sweat. Plus, it limits the noise produced by training, especially on wooden floors. - Easy to roll up and store away - Dampens vibrations - Easy to clean - Length: 1800mm - Width 900mm
Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.
Page 1 of 2 Next page