Parts & Accessories

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

Mounting Kit for Mountain Morph and Turbo Morph G.

Replacement parts for JoeBlow Pro and JoeBlow Booster.

Mounting kit for Mini Morph and Road Morph G.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

Upgrade any pump to the TwinHead pump head.

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.

Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure. Specs - PUMP HEAD COMPATIBILITY: Presta / Schrader pumps - TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves - GAUGE: Digital, 300 psi / 20.7 bar - UNIT: psi, bar, kg / cm2 - BATTERY: CR2032 x 1 (included) - THUMB LOCK: Aluminum - PRESSURE TUNING: Air release button - BODY: Aluminum / Engineering grade polymer - SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7” - WEIGHT: 102 g / 3.60 oz Added Features: - Rotatable head / gauge - Auto-off function

An aluminum air chamber with inflator head that stores an air charge of one liter, up to 200psi / 14 bar. Works with a floor pump to quickly fill your tires and ensures proper installation on a tubeless rim at home. Once you flip the selector from "CHARGE" to "INFLATE" mode, air bypasses the chamber as you use the floor pump to inflate your tire to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves - Air Chamber: One liter, Store up to 200psi / 14 bar air pressure (Varies with the pump capacity) Working Pressure - 1800psi / 124 bar - Material: Aluminum / Rubber / Engineering grade polymer - Flexible hose - Weight: 985g / 2.17oz (Total) 820 g / 1.81lb (Air chamber) - Hose Length: 26 Size - 36 x 11.4 x 8.6cm / 14.2" x 4.5" x 3.4" (Total) - 28.5 x 8.1cm / 11.2" x 3.2" (Air chamber)

- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm

- Ball-inflating needle for footballs, basketballs and more

Replaces worn end on any pump hose. - Head Type: Schrader

• Secures frame pump to frame • Nylon • Also good for use as a watch band

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm

• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps

Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.

Adapts Presta valve stems for use with standard Schrader pumps.

The heart and soul of SILCA. The 731 washer is the same washer used in all Pista pumps for 60 plus years, and is crafted from the same leather as Italian handbags and sports car interiors. From a purely functional standpoint, inexpensive o-rings are most commonly used in this application, but no o-ring can match the smooth feel and zero-stiction action of a leather gasket. It is common today to find SILCA leather gasket pumps throughout the professional peloton (especially during the spring classics) as o-ring seal pumps struggle with heat and often are unable to seal once the pump barrel is hot from inflating more than a few wheels.

The unique bright red gasket borrows from industries that require air-tight seals in the harshest of environments and tests to a life expectancy of more than 5X the carbon-filled rubber or Buna-N materials. The 252 gasket mates with a new compression head design allowing the user to tighten the gasket fit by nearly 200% with a simple twist of the cap. In tests with a major disc wheel manufacturer, the SILCA Disc Adapter literally blew away the field by posting a blow-off pressure of 393 psi, more than 3X the pressure achieved by any competing design. - CNC'd 6061 aluminum alloy construction - Knurled gripping surfaces - Threads into any Schrader pump head - Easily replaceable gasket

Replacement O-ring for Serfas floor pumps

Replacement pump head for Serfas floor pumps. Compatible with: - TCPG - TCPG Plus - FP-200 Classic

Replacement Pump Head Fits dual valve pump models: - FP-35 - FP-50 - FP-55 - FP-100 - FMP-200 - FP-303 - FP-606 - TX-2 - FP-45

The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool. Features: - 1 Tire Lever With Built In CO2 Inflater - 2 Tire Levers With Built In Spoke Hooks - Presta & Scharder Valve Compatible Specs: - Number of Tools: 2 - Weight: 38 Grams - CO2 Lever Length: 5 1/4? - Lever Length: 4 1/2?

Serfas has the basics covered with the Combo Kit 1. It comes with dual valve mini pump, a 6-piece mini tool, a set of tire levers, an 8-piece tire patch kit, and a medium sized saddle bag to carry it all.