Lubes/Cleaners

- Goes on wet to penetrate rollers and side plates, then sets up to a soft, pliable wax - Chain is encased in a waterproof layer, shielded from dirt and grime - Special low melt point wax replenishes drivetrain by slow-Feeding clean lube from the inside layers outward, significantly reducing abrasive wear and eliminating corrosion - Smooth, quiet, trouble-free operation in all conditions for long lasting protection

- Exclusive 100% synthetic bike chain lube - Special surface active formula reduces rolling resistance of drivetrain and improves shifting performance - Deep chain penetration ensures quiet operation - Waterproof formula protects drivetrain under load and extends chain life

Regular lubrication of bicycle chains addresses annoying squeaks and noises, and extends the life of the chain and drivetrain components. Formulated using a proprietary blend of oils, Park Tool CL-1.2 Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Compatible with all bicycle chains. Also works great as general-purpose light lubricant for use on bicycle brake and derailleur cables and housing, spoke nipples, and derailleur and brake pivots. - 4 fl. oz. (118 mL) bottle NOTE: Some painted surfaces can be sensitive to oil and grease. Clean off any excess oil or grease immediately. Test first on an inconspicuous area to see if it causes a stain or discoloration.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal-to-metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

WPL Dry Chain Lube is a premium bio-based chain lube formulated for dry and dusty riding conditions. The endurance formulate has been designed to penetrate deep into chain links to maximize pedal efficiency and facilitate gear-shifting. The biodegradable, non-toxic, and PTFE-free formula keeps the mechanic and the environment safe from harm. Class-leading surface-binding compounds create a thin film around moving chain links to create unparalleled performance for riders of all disciplines. - Premium bio-based formula made with natural ingredients - Emulsifite technology provides dynamic cleaning abilities and prevents black goop build-up - Long-lasting formula improves pedal efficiency by reducing chain wear and friction - For use on bicycle chains, shifters, derailleurs and cables - Biodegradable, non-toxic, PTFE-free formula is environmentally friendly

 An instant bicycle suspension performance booster. WPL ForkBoost lubricates and cleans bicycle suspension seals to eliminate stiction, remove dirt, and lengthen lifetime of the seal. Apply ForkBoost externally to the dust seals of bike suspension by coating the stanchion, pumping the suspension, and wiping away extracted dirt. ForkBoost is fully compatible with rubber and rubber derivatives, causing no risk of damage to the seals, seal swelling or cracking. Use ForkBoost internally during fork rebuilds, to soak foam seals and cut grease to specified thickness - Premium bio-based formula made with natural ingredients - Biodegradable, non-toxic, PTFE-Free formula - Cleans and lubricants bike suspension seals - Removes unwanted dirt and contaminants from suspension seals - Apply externally to dust seals to lengthen seal lifetime

WPL Wet Chain Lube is a premium bio-based chain lube providing efficient pedaling and long-lasting performance to cyclists of all disciplines. Formulated specifically for wet conditions and long-distance riding, proprietary Emulsifite technology allows for easy cleaning of the chain after long rides by dissolving under high-pressure water. The concentration of Emulsifites in the lube has been fine tuned to resist puddle and rainwater but to activate under high-pressure water from a hose. All you have to do is spray your chain with water after your ride, and the accumulated dirt and grime will disappear. - Premium bio-based formula made with natural ingredients - Emulsifite technology provides dynamic cleaning abilities and prevents black goop build-up - Long-lasting formula improves pedal efficiency by reducing chain wear and friction - For use on bicycle chains, shifters, derailleurs and cables - Biodegradable, non-toxic, PTFE-free formula is environmentally friendly

Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Green Fizz's biodegradable solvent-free formula can be safely used on all parts and materials, including carbon fiber, without washing away grease and lubricants or damaging delicate parts. - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike - Use on the whole bike without risk of damage or washing away grease/lube from critical parts - Safe, biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC - Can be used with or without water

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates. - Specifically designed for lubricating chains - Applicator is not included or needed because of the product's consistency

White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.

The 2336K consists of two complete sets of sponges and wicking pads, the most common wear items in the CM-25 Chain Cleaner.

Keep your bike running smoothly with Sunlite's Dry Lube w/Silicone. It's silicone based, so you can use it on metal, plastic, rubber, almost everywhere. Being a dry lube, it doesn't attract dirt and grime, either.

Finish Line's Stanchion Fluoro Oil drastically reduces suspension fork "stiction" to improve your fork's freedom of movement. Stanchion Fluoro Oil is pure fluoropolymer oil — so slippery it even improves the surface slip of Teflon-coated surfaces! Plus, it conditions and protects seals and O-rings to help your fork work better longer. And, you can even use it on derailleur pivots and cables.

- Professional strength cleaner specifically designed to remove grease, oil and other contaminants from electrical components - Unique and proprietary formulation displaces moisture and is completely non-corrosive and non-staining - CFC-free and VOC compliant cleaner safely cleans electrical components, dries quickly and leaves behind no moisture, residue or film

Ever feel like your suspension is not performing the way it used to? Tired of your dropper post not rising like it’s supposed to? - Wet Seal helps breathe life back into your suspension and dropper posts! A couple drops around the seals of your fork, shock, or dropper is all you need to greatly reduce stiction and increase the feel and performance. - Just like lubing your chain, Wet Seal is an important maintenance item. By using Wet Seal, you are keeping your seals lubricated and protected from dirt and debris, thus greatly extending both the life of your seals and suspension. - Formulated with the help of “The Suspension Experts” in Asheville, NC, Wet Seal is safe to use with any fork, shock, or seat post and is a must for those who want to make sure their bike is performing at the top of it’s ability.

Born in the lab and raised between the tapes, Peaty's Link Lube is a minty fresh, triple distilled, ultra high speed chain oil for use in all conditions. Our unique formula penetrates and cleans deep inside your chain, driving out moisture, grit and grime and replacing them with unique blend of oils and waxes (Peaty's secret sauce) to lubricate and protect. Yes, you read that correctly! Peaty's Link Lube actually cleans your chain as you use it! Key Features - - Triple distilled, ultra-high-speed and minty fresh chain oil for use in all conditions - Unique ‘shake-to-awake’ two-part formula penetrates and cleans deep inside your chain, driving out moisture, grit and grime -and replacing them with a proprietary blend of oils and waxes - Clear tip to the applicator cap so lubricant can be seen filling the chamber just before it drips out - Rounded tip to the applicator cap rolls easily over the chain when applying - Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy - Triple distilled, ultra-high-speed and minty fresh chain oil for use in all conditions Application - 1. Always fully degrease your drivetrain before applying fresh lube. For best results, use Peaty's Drivetrain Degreaser. 2. Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all). 3. Remove as much water as you can from the chain - a quick wipe with a clean cloth will do fine. 4. Give the bottle a good shake to evenly distribute the secret sauce. 5. Apply the lube while cycling the chain backwards (eBikes will need to be pedalled forwards in a stand) ensuring every link is adequately covered. 6. Keep cycling the chain for 10seconds or so to help the lube work its way into your chain. 7. Thoroughly wipe away all excess lube from your chain using a clean cloth (excess oil on the outside of the chain will attract dust in dry conditions). Tips - 1. For wet weather conditions, leave a small amount of lube on the outside of the chain for longer-lasting protection. 2. On first use with pre-used chains, you may find that your chain turns black - this is the LinkLube driving out grime from deep in your chain. Just keep riding, degreasing, lubing and repeating until your chain runs shiny clean once more! Caution - Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.

LinkLube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain. Key Features - - Wax based formulation lasts longer in dry, dusty conditions as it does not attract dirt - Blue indicator dye easily shows when lube is dry and ready to ride readily biodegradable - Up to ~300km / 190miles per application (depending on conditions) - Rounded tip to the applicator cap rolls easily over the chain when applying - Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy Application - When applied for the first time, it is essential that LinkLube Dry is applied to a well-degreased and dry drivetrain. If a chain is dirty, then dirt and old lube take up space in the rollers, preventing new lube from reaching the places it needs to, and any residual oil-based lube can also result in reduced durability and premature blackening. 1. Fully degrease before applying fresh lube to ensure there is no old chain oil present. For best results use Peaty’s Foaming Drivetrain Degreaser or, in the case of brand new chains, use Peaty’s XXX solvent degreaser to remove stubborn waterproof factory greases. 2. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all). 3. Allow chain to dry thoroughly before application. 4. Apply to the inside face of the chain only. The light blue colour to the chain lube allows you to see exactly where you have and haven’t applied. 5. Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers. 6. Check for over-application. You can tell if you over-apply LinkLube dry because you’ll see the lube start to fill the narrow chain links. If this happens, just slowly cycle through your gears a few times to transfer the excess lube onto the cassette. You’ll see the lube disappear from the narrow links, leaving lube only where it’s needed on the chain. 7. Leave to fully dry so the lube goes from a light blue colour to completely clear (you’re waiting for the water to evaporate, so leaving it in the sun helps). How long it takes for the water to evaporate - and for the lube to turn clear in colour - depends on the weather conditions. This can range from just a few minutes (if hot), to a few hours (if cold and damp). for best results apply the night before. 8. Ride! Caution - Do not get linklube (or any lube for that matter!) on your brakes or brake pads.

LinkLube Wet Weather chain lube is a bespoke blend of oils, waxes & powerful corrosion inhibitors that will give you a super smooth, hyper-durable, quiet running chain in the wettest riding conditions. Application - 1. Always fully degrease your drivetrain before applying fresh lube. For best results, use Peaty's Drivetrain Degreaser. 2. Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all). 3. Remove as much water as you can from the chain - a quick wipe with a clean cloth will do fine. 4. Give the bottle a good shake. 5. Apply the lube while cycling the chain backwards (eBikes will need to be pedalled forwards in a stand) ensuring every link is adequately covered. 6. Keep cycling the chain for 10seconds or so to help the lube work its way into your chain. 7. Thoroughly wipe away all excess lube from your chain using a clean cloth

- Dissolves and isolates dirt for lasting performance in mixed conditions. - Superior durability, wear protection and lubrication. - New formula lasts runs cleaner and lasts longer. - Biodegradable, non-toxic, vegetable/synthetic formula. Designed for mixed to wet conditions, Chainj is an advanced biodegradable vegetable/synthetic oil blend engineered to provide superior efficiency, wear protection, and durability. The vegetable oil is not only sustainable but also associates ionically with metal surfaces creating a resilient protective barrier for added life and increased anti-wear properties. Additionally, Chainj features detergent properties which actively dissolve and isolate dirt as you ride. Great for lubrication of parts too!

- The original synthetic chain lube formulated specifically for mountain bikes. - New formula lasts even longer and is dye-free. - Superior wear protection, efficiency and durability for extreme conditions/mileage. - Unique detergents break down and isolate dirt protecting the surfaces of your chain. This is the product that started it all back in 1989. This breakthrough lubricant revolutionized the entire chain lube market. This full synthetic lubricant is designed to handle the harshest conditions and outlast other lubes in all conditions. Syn Lube is formulated with extreme pressure additives, corrosion inhibitors, and tackifiers to provide incredible wear protection, lubrication, and staying power in extreme wet and muddy conditions. Unique polymer detergents also work to break down dirt protecting the surfaces of your chain. Go ahead, play in the mud.

- For hydraulic braking systems - Non-corrosive mineral oil - Excellent heat managment properties - Volumes : 50ml or 1000ml

The original formula in a handy can which uses an 8" applicator hose for precise application for hard to reach spaces. - WD-40 multi-use offers one formula with five functions. It lubricates, penetrates, protects, removes, and displaces moisture - Safe on rubber, metal, wood and most plastics

Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!

Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers

Finish Line Showroom Polish is made with Teflon fluoropolymer and uses DuPont Teflon Surface Protector technology. Provides a brilliant shine plus long term protection on all surfaces of a bicycle. 100% safe for all plastics, rubbers and carbon fiber parts.

Showroom™ Polish & Protectant with Ceramic Technology delivers maximum luster, it repels water, and prevents grime buildup. Your bike and components will stay clean for longer intervals. Showroom is safe for use on clear coat, carbon fiber, aluminum, titanium, steel, chrome, and stainless steel. Simply spray on and let sit for 10 seconds. Then wipe off with a clean rag. Due to Showroom’s proprietary formulation there is no need to pre-wash the bike. Enjoy the shine! Showroom Polish & Protectant will: - Clean frames and components without a prewash - Protect the bicycle from water and perspiration - Prevent a buildup of grit and grime - Keep your bicycle looking new

The great thing about wax-type lubes is that the shedding action of wax keeps parts cleaner during most riding conditions. Finish Line's Wax Lubricant is a unique formulation that features DuPont's Krytox, a highly advanced, thermally stable lubricant. Its specialized paraffin waxes set up dry and hard to repel grit and grime so your drivetrain runs silky-smooth and stays clean.

Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes. - Doesn't absorb water - Lubricates entire braking system

Fast-acting, all-purpose cleaner designed to remove mud, dirt, and debris from matte finishes. Specially blended surfactants and detergents lift away solids without sticking to the surface, leaving the surface clean and residue-free. Non-toxic, non-flammable, and eco-friendly formulation contains no VOCs, harmful acids, CFC’s or solvents and is 50 state VOC compliant. For use as a professional strength cleaner for matte finishes. Safe for use on all matte surfaces, from equipment to accessories. Features: - Cleans and protects matte finishes. - Adds no gloss or shine. - Removes dirt, dust, road grime, fingerprints, and more. - 100% biodegradable. - Contains no VOC's, harmful acids, CFC's or solvents. - Non-flammable.

Professional strength cleaner specifically designed to clean suspension internally and externally. The unique and proprietary formulation combines industrial-strength cleaners with a powerful spray to ensure maximum cleanliness while leaving a dry and residue-free surface. Suspension Clean is strong enough to eliminate tough-to-clean grime and debris, but safe enough for incidental contact with Nitrile (buna-n), Viton, and most seal materials. For use on internal and external suspension components. Safe for incidental contact with most seal materials, but not suitable for use on silicone-based rubber. Never soak rubber materials. Avoid spraying on painted surfaces. May be harmful to some plastics. Features: - Formulated specifically for the industry professional. - Industrial strength cleaners remove tough-to-clean grime and debris. - Dries completely, leaving no film, residue, or moisture droplets. - Safe for incidental contact with most seal materials. - No harsh chemical smell.

- Makes your bike shine like new and keeps it that way. - Biodegradable formula cleans, polishes, and protects in one step. - Also great for dropper posts, suspension, and for seating tire beads. The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step making your bike look like new and future cleaning easier! Also great for dropper posts, suspension, and for seating tire beads. Bike Lust can be used on all types of materials and finishes including carbon fiber and matte finishes. It's also fantastic on tires to help shed mud and dirt as you ride.

SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

ProGold Helmet Cleaner and Deodorizer Aerosol: 8oz - Foaming action safely removes odors from helmet liner and padding - Loosens and removes dirt and grime from helmet exterior - Can be used on helmets, shoes, grips, saddles, and any protective gear where padding cannot be removed - No greasy residue - Dries quickly

Dumonde Tech’s Classic Liquid Grease is a high-performance replacement for traditional viscosity grease. Liquid Grease reduces the coefficient of friction through Polymer Technology. Liquid Grease polymerizes and bonds to the surface providing extremely low drag. Liquid Grease is attracted to heat to provide lubrication at critical locations. Highly recommended for steel and ceramic cartridge bearing. Eliminates drag that grease-packed bearing experience for a drag-free bearing, even in the freezing temperatures. Ideal for suspension fork legs, full suspension pivots, wheel bearings, and roller bearing. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross.

ProGold ProLink is designed to shed dirt, mud, and abrasives, and reduce tacky build-up in all climates. - Smoother shifting, quieter drive train - Repels moisture and reduces oxidation and corrosion - Disperses water and resists wash-off - Will not build up or get tacky - Works well in all climates - Longer chain and sprocket life - Long-lasting - Can be used as a dry lubricant - Environmentally friendly - Available in: 4 fluid-ounce drip, 8 fluid-ounce aerosol, 16 fluid-ounce pump, and 32 fluid-ounce.

- 100% Natural and biodegradable, Without animal products - Apply a small amount, Work in, Then rinse off with water - Leaves skin clean with a subtle forest scent

The #1-selling penetrant since 1957, PB B'laster quickly busts loose rusted, or frozen parts caused by rust and corrosion. It also contains a non-evaporating lubricant that saves time and equipment and protects against further rust and corrosion. Features - #1-Selling Penetrant - Breaks Free Rusted or Frozen Parts - Protects Against Further Rust and Corrosion - Use on Automotive, Industrial, Marine, Plumbing & Other Equipment - New ProStraw® with Control Flow Technology® (part# 16-PB-DS)

High-performance hydraulic fluid designed specifically for use in seat posts. The OEM-recommended formulation reduces friction, ensuring fast, quiet action with minimal drag. High viscosity index formulation ensures consistent drop and return speeds under all conditions. A proprietary additive system protects seals, minimizes wear, and prevents corrosion, improving performance throughout the seat post life. For use in all hydraulic seat posts. Features: - Formulated to reduce friction and drag. - Consistent fast and quiet action. - Resists fade to ensure consistent drop and return speeds. - Protects components and ensures optimal performance throughout seat post life. - OEM-approved and recommended.

- Highly effective foam cleaner which is ideal for helmet liners, pads, gloves, shoes, body armors or any soft material which comes into contact with the rider - Instant foaming action, which gently agitates dirt and grime away from the surface leaving a fresh citric burst fragrance

Peaty’s Bicycle Assembly Grease uses the latest generation of base oils and additives to provide long-lasting, low friction performance under extreme loads. Meeting the ultimate biodegradability OECD test 301B, our assembly grease has a high resistance to water washout, excellent anti-corrosion properties and adhesion to metallic parts, while remaining Compatible with most other conventional greases. APPLICATION INSTRUCTIONS: 1. Fully degrease & dry parts to be greased. 2. For removal of waterproof bearing greases Use our XXX Solvent Degreaser. 3. Apply grease using a gloved finger, M15 threaded grease gun or paintbrush. 4. Reassemble parts and wipe away any excess grease with a clean cloth. ADHESION TO METALLIC PARTS? The number one requirement for a grease is that it lubricates really well. In order for it to lubricate really well, a good grease needs molecules which flow over each other easily (less drag) and coat the metal surface thoroughly and evenly, to prevent metal on metal contact (which results in parts wearing). In nerd talk, our base oils have been formulated using synthetic esters with a marked polarity. Ok, who’s Ester and why is she in your oil?! Ester isn’t a woman, it’s a variant of synthetic oil! Esters are more expensive than straight synthetic oils because the ingredients all have to be collected from natural sources and then synthesized in much smaller quantities than regular synthetic oil. The number one reason to use ester oil is how well it bonds to surfaces. Ester oil has an electrochemical bond because the ester molecule is polar, sort of like a fridge magnet. It is attracted to metal and sticks like Peaty’s hand to a fresh cool pint of Yorkshire ale. Also, because of this electrochemical charge, the grease naturally distributes itself evenly over a surface since each molecule will repel away from each other - like trying to push two positive ends of a magnet together. COMPATABILITY Peaty’s Bicycle Assembly Grease is compatible with all oils of a mineral or synthetic nature except for PAG (Polyalkylene Glycol) based products. WHAT IS ‘ULTIMATE BIODEGRADABILITY – OECD 301 B’? This is the ability of a product to be transformed into a simple element by living organisms. The OECD 301B standard replaces the obsolete CEC standard (primary biodegradability) 100% POST CONSUMER RECYCLED TUBES Our tubes are made from 100% post consumer recycled plastic. The recycling process is performed according to EU REACH standards using waste LDPE plastic from used plastic shopping bags and food films. KEY POINTS - Keeps your bike running quieter & smoother for longer - Long-lasting lubrication under extreme loads - Anti-corrosion protection - High resistance to water washout - Readily Biodegradable - 100% PCR & PIR Recycled Packaging - M15 threaded cap

Peaty’s SPEED Grease runs 2.5 times faster than our assembly grease, whilst still providing long-lasting performance under extreme Loads. Perfect for use in race hubs, bottom brackets and other fast moving parts. Meeting the ultimate biodegradability OECD test 301B, our SPEED Grease has a high resistance to water wash out, excellent anti-corrosion properties and adhesion to metallic parts while remaining compatible with most other conventional greases. APPLICATION INSTRUCTIONS This product is designed for professional use only. If you’re unsure what you’re doing then please consult your local bike shop, workshop or mobile mechanic. Use in fully sealed parts only. If using to replace grease in bearings then use only with brand new bearings and seals. Attempting to strip, re-grease, and re-build old bearings will result in damaged bearing seals. Do not allow grease to contact brake disks or pads. ADHESION TO METALLIC PARTS The number one requirement for a grease is that it lubricates really well. In order for it to lubricate really well, a good grease needs molecules that flow over each other easily (less drag) and coat the metal surface thoroughly and evenly, to prevent metal-on-metal contact (which results in parts wearing). In nerd talk, our base oils have been formulated using synthetic esters with a marked polarity. Ok, who’s Ester and why is she in your oil?! Ester isn’t a woman, it’s a variant of synthetic oil! Esters are more expensive than straight synthetic oils because the ingredients all have to be collected from natural sources and then synthesized in much smaller quantities than regular synthetic oil. The number one reason to use ester oil is how well it bonds to surfaces. Ester oil has an electrochemical bond because the ester molecule is polar, sort of like a fridge magnet. It is attracted to metal and sticks like Peaty’s hand to a fresh cool pint of Yorkshire ale. Also, because of this electrochemical charge, the grease naturally distributes itself evenly over a surface since each molecule will repel away from each other - like trying to push two positive ends of a magnet together. COMPATIBILITY Peaty’s Bicycle Assembly Grease is compatible with all oils of a mineral or synthetic nature except for PAG (Polyalkylene Glycol) based products. WHAT IS ‘ULTIMATE BIODEGRADABILITY – OECD 301 B’? This is the ability of a product to be transformed into a simple element by living organisms. The OECD 301B standard replaces the obsolete CEC standard (primary biodegradability) 100% POST-CONSUMER RECYCLED TUBES Our tubes are made from 100% post-consumer recycled plastic. The recycling process is performed according to EU REACH standards using waste LDPE plastic from used plastic shopping bags and food films. KEY POINTS For use in race wheel bearings, bottom brackets & other fast-moving parts Long-lasting lubrication under extreme loads Anti-corrosion protection High resistance to water washout Readily Biodegradable 100% PCR & PIR Recycled Packaging M15 threaded cap

Absolute Bike Grease: WPL Absolute Bike Grease is a premium calcium-based grease of high thermal stability composed purely of bio-based oils and chemicals. The zero-toxicity formula is compatible with rubber and elastomers providing a working temperature range of -40°C to 120°C. The class-leading, ultra-slippery formula is a mechanic's choice for building bicycles with efficient movement constancy and elevated corrosion resistance. - Premium bio-based formula made with natural ingredients - Improve performance of moving parts with advanced friction-reducing properties - All purpose, waterproof assembly grease for bearings, bushings, wheels, and headsets - Working temperature range of -40°C to 120°C - Biodegradable, non-toxic formula is safe for rubber and rubber derivatives

WPL Bio-Solvent Degreaser (473ml) is a powerful biodegradable solvent degreaser for eliminating contaminants and grease build-up from drivetrain parts. The non-toxic, petroleum-free, bio-based formula easily dissolves stubborn contaminants, leaving the drivetrain clean and efficient. Can be sprayed directly onto bicycle parts or used for isolated cleaning in chain cleaning tools or degreaser bins. - Premium bio-based formula made with natural ingredients - Powerful solvent easily removes grease and grime - For use on drivetrain parts with stubborn grease build-up and contamination - Easy spray trigger penetrates deep into moving parts

A cream to help assist the break-in process and keep leather supple, specially formulated from natural ingredients to condition, preserve and shower-proof your saddle. Proofide is the only substance that should be used to care for your Brooks Leather Saddle, specially formulated from natural ingredients to condition, preserve and showerproof. Apply a little of this leather saddle cream to the finished side of the leather. Allow to permeate until dry and then polish off. Also apply Proofide to the underside of the saddle, but leave this coating on to protect against dirt and moisture. It should be used several times during the ‘breaking-in’ period and periodically (3-6 months) thereafter. It is recommended to polish the saddle with a soft cloth before first use.

Brooks' Proofide Saddle Dressing shortens the break-in period of a new saddle. It's specially formulated from natural ingredients to preserve and condition the leather, keeping it supple and shower-proof for the life of the saddle.

Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any. - Great for frozen crank bolts, seized seat posts and rusty chains and derailleurs - Includes oils and rust inhibitors to provide lubrication and protection after use - Use: Spray the rusted part for 10 to 20 seconds and wait 2-3 minutes for the release agent to fully wick in and break the rust. For severe rust-welded parts, spray 30-60 seconds for maximum freezing effect and wait ten minutes to one hour for thorough break-down of rust. When rehabbing a bicycle chain, soak one small section at a time.

Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.