Car Racks

When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes

When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium matte powder coat - Compatible with 2-inch NV Base 2.0 - Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Quick change from 2 to 4 bikes

The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes

Piston X Add On LED Dual Ratchet Platform Rack with Kashima

Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base

With years of experience and feedback, Kuat overhauled every feature and streamlined the look while maintaining the spirit of its predecessor. A re-designed pivot system with foot assist will endure a lifetime of abuse. Adjustable cradles allow for fast bike fit adjustments. Individual bike cable locks are longer, more durable, and easier to use. Holds bikes with up to 4.8-inch tires ensure a true fit for any bike in your stable. Updated ratchet arm creates an intuitive release and a more stable tow. The ground-up re-design of the Trail Doc work stand delivers a pro level feel. These are only the highlights, resulting from 3 years of extensive development, making the NV 2.0 the most advanced hitch rack on the planet. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks - Trail Doc included - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium gloss metallic powder with water transferred logos - Hitch lock included - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch, and tires as large as 4.8-inch with use of the Phat Bike Kit - Fits 20-inch to 29-inch tires - Wheel adapter needed for 20-24-inch tires - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV 2.0 Add-On

The Piston® Pro features some of the same great features as The Piston® Pro X minus a few bells and whistles. Features like all metal construction, OneTap™ hydro-pneumatic tire arms that make no contact on the bike frame, and tool-free wheel chock slides. But don't worry, this thing still sings. - All metal construction - OneTap™ hydro-pneumatic tire arms - No frame contact - Patented FastFit™ tool-free wheel chock system - Patented PedalPivot™ - Patented Flatlock™ hitch cam - No Worries Limited Warranty - 2 – Bike capacity (Add-ons Available) - 67 lbs. per tray on 2” 2-bike, 60lbs. for 1.25” version - 42 lbs. per tray on chassis mounted RV hitch (see limited warranty for details) - 53” Max wheelbase - 5” Max tire width

"What if?" - When we asked the question, the Piston Pro X was the answer. Genuine Kashima coated hydro-pneumatic arms make loading and unloading a one-handed operation. Touchless arms grab the tires, keeping your bike secure, and your paint pristine. Low-profile integrated LED tail lights synchronize with your vehicle, providing enhanced rear visibility and on-road safety. These and many other features culminate in a rack designed, built, and tested to push the envelope and provide you with unparalleled ease of use, peace of mind, and lasting value. This is the Piston Pro X. OneTap Hit the levers and watch as the cradle arms open automatically into position. Kuat's new patented hydro-pneumatic OneTap levers make loading your bikes easy, and fun. FastFit Wheel Chock System It's called FastFit for a reason: This patent-pending feature changes wheel sizes from 18" to 29" in seconds, tool-free. QuickConnect QuickConnect lets you expand or consolidate your Piston from 2 to 4 bikes in a matter of minutes. Current record: 44s. Foot & Hand Pivot Fold your Piston up or down with the convenient foot pedal. Have a fully loaded 4-bike? Easy Assembly EasyClip patent-pending tray tabs make assembling your Piston quick and painless. Spend all that time you save riding your bike. 99% Metal Construction Just because it's sexy doesn't mean it isn't heavy duty. The Piston Pro X is all metal and ready to take on all the adventure you can throw at it. TIGER DRYLAC The Piston Pro X is finished with TIGER DRYLAC, a class-leading powdercoat designed for the unforgiving conditions of both day-in, day-out commutes and epic road trips alike. Hard Wearing Hardware Igus bushings and 308 Stainless Steel, 750-hour salt spray automotive-grade hardware keep the burly, long-lasting trend going. This rack will stand up to years of demanding mileage and use. Liquid Painted Logo A little cherry on top: A liquid painted 3D logo finishes out the rack aesthetic adding dimension and style. LED Taillights QuickConnect patented trays and Add-Ons are prewired. LED lighting will connect and sync automatically when assembled. Connects to the vehicle via the included flat 4-pin connector. Magnetic Cable Docking Set up is as easy as snapping in the magnetic cable, and plugging the 4-Pin into your vehicle's trailer outlet. No confusing diagrams or head scratching routing. POGO Pins QuickConnect patented Add-Ons are pre-wired. Simply install the Add-On and the LED lightning will connect and sync automatically. Cable Management Provided magnetic clips let you manage the LED cable, keeping everything tidy and out of the way. Locking Security Tool No more Where's Waldo in your glovebox: The multi-purpose security tool locks in place at the end of the rack, ensuring it's always there when you need it. Flatlock Hitch Cam The patent-pending Flatlock hitch cam keeps things stable and its tamper-resistant head keeps it secure. Plus, we've added a stainless steel hitch lock for double security and additional peace of mind. High-Strand 12mm Cable Semi-integrated ultra flexible high strand 12mm cable, with plenty of length for the wheels and frames of all your bikes. The soft touch outer coating is also easy on your bikes.

Origin-8's Bike Block Fork Mount can be mounted to almost any flat surface and securely holds your bike by the fork. It's made of sturdy steel and works with quick release 9mm dropouts as well as 15mm and 20mm through axles!

- Heavy-duty, rust-free AL6061-T6 construction - Mounts vertically or horizontally - Great for storage and transportation - Compatible with the following fork spacing: - 9mm x 100mm (Standard QR) - 12mm x 100mm - 15mm x 100mm - 15mm x 110mm (Standard Boost) - 20mm x 110mm - Includes all axle adapters and QR skewer - Use: Fork Mount - Hitch Size/Mount: 100/110mm Spacing

Shuttle Saver - Our new T2 pad is made to fit any shape of tailgate, and has an adjustable rear camera panel - both RF exclusive, patent pending features. Carry up to 6 bikes with no bike on bike crime with raised bumpers + downtube straps. Backup Plan - Exclusive to the T2 is the adjustable rear panel that allows for easy adaptation to any rear camera + handle position. Shape Shifter - Six adjustment straps along top edge of the installed pad provide a fit tailored to your tailgate’s shape - even curved! Just Say No - To bike on bike crime. The T2 features raised bumpers in the truck box that keep frame downtubes in place and secure, minimizing contact while shuttling. Specs - Construction: PVC tarpaulin with micro-brushed inner lining - Adjustment: Top edge adjustment, camera window adjustment - Other: Raised bike spacers and padding, hook-and-loop frame straps, lock loop Bike Capacity - Mid-Size Truck (Tacoma or similar): 5-bike - Full-Size Truck (Ford F-150, F-350 or similar): 6-bike

Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.

RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

Secure your through-axle-equipped bike to your fork mount bike rack (sold separately) with RockyMounts' DriveShaft. This adapter allows you to quickly and easily mount a bike with a 15mm or 20mm through-axle fork to your quick-release fork mount rack. It also comes with a lock for peace of mind.

The SwitchHitter LS is the future-proof solution for those who want a low-profile, roof-mounted option. Compatible with both QR and Thru-Axles up to 15x150, capable of carrying tires up to 3.0-inch, and universal mounting options for cross bars. Integrated cable locks keep your bike safe for those quick trips. The SwitchHitter LS is incredibly versatile, adaptable, and intuitive. It will stay with you as your bike stable evolves. Product Features - Carries 1 bike, up to 35 lbs - Future-proof fork mount for both QR and Thru-Axle. Compatible with 12x100, 15x100, 15x110, and 9x100 quick release (15x150 sleeve available, sold separately) - Tire Width: 19mm road bike tires - 3.0-inch mountain bike tires - Wheel Diameter: 20-inch - 29-inch - Wheelbase: 34-inch - 48-inch - Two fitting options included; Stainless steel mounting straps for wrap around fits most factory, round or square crossbars, and Integrated slotted crossbar mount for Thule Aeroblade & Yakima Jetstream, or OEM Audi, BMW, Mercedes, Mini, Volkswagen and Volvo crossbars - Integrated cable locks secure individual bikes to tray - Lock cores sold separately - On Thule Evo Bars, the slotted hardware plates do not fit and you must use the pre-installed form fitting, stainless steel straps and rear clamp.

RockyMount's Brass Knuckles rack gets your bike from point A to point B with the minimum of hassle and the maximum of security. The aluminum arm uses finely indexed ratcheting to hold front bike wheels from 20- to 29-inches with widths from skinny road tires to fat DH monsters. Form-fitting mounting hardware plays nicely with almost any roof-mounted bars: round, square, or aero. When your bike isn't on the roof, the arm folds down for an extremely low profile for minimal wind noise and maximum gas mileage. For extra security, you can lock the bike to the rack and the rack to your car with lock cores (sold separately).

The little brother of the MonoRail, the MonoRail Solo is perfect for those who do not need all of the capacity but still want the versatility of it’s larger brother. Superlight with a 25 lbs rack weight, the solo is our easiest rack to take on and off a vehicle. Out of the box the MonoRail family has the widest carrying capacity of our line up, due to their ability to fit up to a 5” fat bike tire. The solo also has the added versatility of allowing for both 1.25” and 2” hitches out of the box. - Carries 1 bike, up to 60 lbs. Expandable to 2 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Fits both 1.25” and 2” hitches with adapter sleeve (included) & anti-wobble bolt - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 25 lbs (shipping weight 35 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door.

The WestSlope is a wallet-friendly, feature-filled and clean platform hitch rack. The frame body is sloped to create a tiered mounting arrangement that eliminates handlebar interference between the bikes. By using a soft-touch wheel hook and a ratcheted swing arm, the WestSlope provides a secure fit with zero frame contact. - Carries 2 bikes, up to 40 lbs each - Tire Width: 19mm road bike tires - 3.0-inch mountain bike tires - Wheel Diameter: 20-inch - 29-inch - Wheelbase: 34-inch - 48-inch - Fits both 1.25-inch and 2-inch hitches with adapter sleeve & anti wobble bolt - Tiered mounting eliminates handlebar interference between bikes - No contact with frame, secures bicycle by front wheel - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - WestSlope Lock Kit sold separately

The WestSlope 3 is a wallet-friendly, feature-filled and clean platform hitch rack. The big brother to the WestSlope, just with the capacity for an extra bike. The frame body is sloped to create a tiered mounting arrangement that eliminates handlebar interference between the bikes. By using a soft-touch wheel hook and a ratcheted swing arm, the WestSlope provides a secure fit with zero frame contact. - Carries 3 bikes, up to 40 lbs each - Tiered mounting eliminates handlebar interference between bikes - No contact with frame, secures bicycle by front wheel - Carries road tires up to 3.0” wide mountain bike tires, and diameters from 20” to 29” - Compatible with bicycles’ wheelbases from 34” to 48” - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - Fits 2” hitches only, with anti wobble bolt - Not for use with fender-equipped bicycles - Rack weight 43 lbs (Shipping weight 47 lbs) - WestSlope Lock Kit sold separately

The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes ONLY, up to 60 lbs per tray (120 lbs total). 1.25" variant is NOT compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door

The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2” variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door

The HighNoon FC is the first and only rack in the RockyMounts' family that supports use of bikes with fenders. The rack includes an upswept base allowing for better departure angle, as well as a tiered platform for handlebar clearance. The dual strap system allows for secure transport for bikes with and without fenders. - Compatible with bikes with fenders - Compatible with bikes without fenders - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2" variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 50" - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and the adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Rack weight 39 lbs (shipping weight 49 lbs) - Fit Memo- For cargo vans (vehicles with flat backs), Depending on hitch placement, handlebar width, an 8" Hitch Extension may be required for wide mountain bike handlebars to clear the doors.

The BackStage is the only swing away platform hitch rack on the market that swings out 180 degrees. No matter if you have a truck, SUV or camper van, this rack is perfect for those who need open access to the back end of their vehicle. Based around the MonoRail platform, the BackStage provides full access to the back of the vehicle, even with bikes loaded. - The industry’s first 180 degree swing away platform hitch rack - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). Not compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Only available for 2" hitches. Utilizes RockyMounts premium 3-axis anti wobble system - Includes locking hitch bolt and cable lock, keyed alike - Not for use with fender equipped bicycles - Rack weight 59 lbs (shipping weight 75 lbs) - For cargo vans like Sprinter, Transit and ProMaster, an 8" Hitch Extension is usually required for handlebars to clear the door. Road/Gravel is usually OK, modern mountain bike bars are too wide and can contact the rear door and the hitch extension is required.

The AfterParty is our second generation swing away platform hitch rack. While updating and applying the base from the BackStage with the innovative platform from the GuideRail, the afterparty is the ideal rack for Vans, Trucks, or SUVs where access to the rear end of the vehicle is needed. By utilizing dual load arms, the rack completely eliminates frame or fork contact, it allows for asymmetric bike loading to avoid handlebar interference, and it creates a simple aesthetic that virtually blends in with most vehicles. Carrying bikes up to 60lbs per tray, tires up to 3" wide, and wheelbases up to 55" the AfterParty can handle just about anything including most E-bikes. Included is a 10mm square link chain to secure your bikes without stress. - Can swing out a full 180* from the rear of the vehicle to allow for complete access to the back end - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). Not expandable, or compatible with the GuideRail Add-On - Bike can be loaded asymmetrically to eliminate handlebar interference - No contact with frame or fork, secures bicycle by contact with tires only - Carries 19mm road tires up to 3.0" wide mountain bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 55" - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - Only available for 2" hitches. Utilizes RockyMounts premium 3-axis anti wobble system - Included 10mm square link chain provides best-in-class security - Not for use with fender-equipped bicycles (You can use a foam pad, but we cannot be responsible for damaged fenders) - Rack weight 60 lbs (shipping weight 83 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door.

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver. - Adds extra security to bike racks and hitch devices - Eliminates rattling and wobbling - Compatible with 2" receivers

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Easy to move rack to/from vehicle without any lifting, this wheeled dollie attaches quickly t- most 2" receiver compatible racks - Wheels ensure smooth and effortless transport of rack to/from vehicle without any lifting - Connects to 2" stinger with simple pin - Works with most Saris hitch racks and other racks that bolt t- vehicle receiver - Easy to remove

Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock. - Secure bike rack to vehicle to deter theft. - Cables secured within closed trunk. - Includes 8 ft. cable. - Includes 2 keys.

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.

Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs An all-in-one design that fits four thru axle spacing standards: - 15mm x 100mm - 15mm x 110mm - 12mm x 100mm - 20mm x 110mm - Mounts directly to any flat surface for bike transport or storage - Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately) - Mounting hardware not included

Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.

Having enough room for another bike is rarely an issue with Saris' Traps Triple Track. Simply lay it on the floor of your SUV or place it in your truck bed and add your choice of attachments. Your bikes are guaranteed a stable ride. The unique design allows bikes to be staggered or angled for hauling more bikes in a compact space. Fork mounts and wheel holders are sold individually to let you customize your Triple Track.

All the Essentials of a Reliable Trunk Rack With the Guardian bike rack, what you see is what you get. And what you see is a complete trunk rack, simplified to its purest form. Made with steel sourced from America's heartland, the Guardian is tough enough to stand-up to the elements, yet gentle on bikes. Easy-to-use bike hold downs with ratcheting straps grip the bike's frame, while rack straps equipped with spring-loaded buckles ensure a snug rack-to-vehicle fit. This simple trunk rack fits most sedans, hatchbacks and vans, and comes completely assembled. Just take it out of the box, put it onto the car, and you'll be rolling in no time. Features - Carries 2 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Trunk bike rack. - No assembly needed. - Bike hold downs with ratcheting straps separate and firmly hold up to 3 bikes. - Bike rack straps with spring-loaded buckles ensure secure rack-to-vehicle fit. - Rack arms adjust to fit most sedans, hatchbacks and vans. - American-made steel frame construction. - Folds for compact, convenient storage. - Coated hooks protect vehicle's finish. - Heavy-duty foam pads protect vehicle's finish.

Give your bike first-class treatment on the way to the ride. Saris' Traps Single Track mounts easily on the floor of your cargo area or truck bed and holds 2 bikes. Included is mounting hardware for three Traps fork mounts (sold separately).

Having enough room for another bike is rarely an issue with Saris' Traps Triple Track. Simply lay it on the floor of your SUV or place it in your truck bed and add your choice of attachments. Your bikes are guaranteed a stable ride. The unique design allows bikes to be staggered or angled for hauling more bikes in a compact space. Fork mounts and wheel holders are sold individually to let you customize your Triple Track.

Simple. Reliable. American-Made. This entry-level 3-bike trunk rack gets you where you want to go. No frills, no complications—the Guardian is as simple as can be, without sacrificing security. Easy-to-use bike hold downs with ratcheting straps grip the bike's frame, while rack straps equipped with spring-loaded buckles ensure a snug rack-to-vehicle fit to keep precious cargo secure during transit. Plus, the Guardian 3-bike comes completely assembled and ready to go, right out of the box. What more could you ask for in a bike rack? Features - Carries 3 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Trunk bike rack. - No assembly needed. - Bike hold downs with ratcheting straps separate and firmly hold up to 3 bikes. - Bike rack straps with spring-loaded buckles ensure secure rack-to-vehicle fit. - Rack arms adjust to fit most sedans, hatchbacks and vans - American-made steel frame construction. - Folds for compact, convenient storage. - Coated hooks protect vehicle's finish. - Heavy-duty foam pads protect vehicle's finish.

The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Hitch Base and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Universal Hitch Base fits 1.25" and 2" receivers - Base accommodates 1 bike tray + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 2 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle

The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Hitch Base fits 2" receivers - Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 3 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle

The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.

This EX version of the best-selling Bones trunk rack fits 20% more of the most popular vehicles, including those with spoilers. Spoiler Alert What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20% Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs, a strap management system and two rad colors: Celebration Red, and Celebration Blue. Plus, we’ll donate $10 to World Bicycle Relief for every Celebration Red Bones EX rack purchased, as well as $10 for Free Bikes 4 Kids for every Celebration Blue. That way you can look good and do good too. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Available in black, sparkle blue, and sparkle red. - Patents issued and pending. - Lightweight at 11 lbs.

Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.

A Leg Above the Rest The Bones trunk rack made a name for itself in the mid-90's, and 25 years later it's doing it again. How? By expanding its vehicle compatibility to fit 20% more of the most popular vehicles, including those with spoilers. Featuring a unique arched leg, the Bones EX gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs. This simple, yet game-changing design by Fabio Pedrini transformed the iconic trunk rack into one that could fit 90% of the top 50 vehicles sold in the USA. Equipped with premium bike hold downs and a streamlined strap management system, the Bones EX is penning its own chapter in history books. And just like its legendary predecessor, the Bones EX is made in Madison, Wisconsin, USA, with locally sourced materials that'll last a lifetime. Features - Carries 2 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.

The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Hitch Base fits 2" receivers - Base accommodates 3 bike trays + 1 Add-On Bike Tray , sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 4 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle

An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.

What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.

- Carries 2 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-ubcg hitches out of the box. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 15 pounds. - Made in Madison, WI.

If you’re looking for a car rack that will haul your favorite 2-wheeled possessions with swagger and security, the Bones Hitch 3-bike has you covered. With arching lines and robust, American-made materials this hitch rack can be summarized in two words: beautiful simplicity. Weighing in at only 16 pounds, this 3-bike hitch rack is a full 25% lighter than similar racks—et just as strong. With integrated anti-sways and hold downs, the Bones Hitch is a fully functional piece of art. - Carries 3 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 16 pounds. - Made in Madison, WI.

The Bones Hitch 4-Bike rack is born out of the design and function of Saris' best-selling Bones rack and brought to life in the form of a hitch rack. You wanted a nicely designed, tilting rack at a great value, and you wanted it to be lightweight. The result is the Bones Hitch. The Bones Hitch is one of the lightest racks in the marketplace yet every bit as strong and durable. That's why Saris backs it—along with all of their racks—with a lifetime warranty. Stylish, lightweight, easy to use and made here in the USA—who says you can't have it all? - Carries 4 bikes, up to 35 pounds each. - Preassembled in box. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches out of the box. - Lifetime warranty. - Made in Madison, WI. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 20 lbs.

Ultimate bike protection and loading/unloading ease with the MHS Duo Add-On Bike Tray. Integrates seamlessly with any MHS Modular Base. - Saris MHS Duo Add-On platform bike rack connects quickly and easily to any MHS Base - DUO Dual-arm design provides the ultimate bike carrying versatility, compatible with the widest wide range of bikes, including e-bikes, fat bikes, fender bikes and step through - Zero frame contact bike protection and super stable bike transport - Dual-arm design provides superior bike protection and limits potential of bike to bike contact - Carries 1 bike up to 35 lbs - Tool-free, adjustable wheel block accommodates wheel sizes from 20 to 29 inches and tires as wide as 5 inches. - Accommodates wheel bases up to 53" - Fully locking with integrated steel cable that stores conveniently in tray - Fast, easy, and secure mounting to MHS Hitch Base (Base sold separately)

Ultimate bike protection and loading/unloading ease with the MHS Duo Bike Tray. Integrates seamlessly with any MHS Modular Base. - Saris MHS Duo platform bike rack connects quickly and easily to any MHS Base - DUO Dual-arm design provides the ultimate bike carrying versatility, compatible with the widest wide range of bikes, including e-bikes, fat bikes, fender bikes and step through - Zero frame contact bike protection and super stable bike transport - Dual-arm design provides superior bike protection and limits potential of bike to bike contact - Carries 1 bike up to 60 lbs - Tool-free, adjustable wheel block accommodates wheel sizes from 20 to 29 inches and tires as wide as 5 inches. - Accommodates wheelbases up to 53" - Fully locking with integrated steel cable that stores conveniently in tray - Fast, easy, and secure mounting to MHS Hitch Base (Base sold separately)