Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Cables

$6.59
Improve the performance and set up of your V-brakes with Origin-8's V-Brake Barrel Adjuster Noodle. Standard 90° stainless steel noodle with built-in barrel adjuster for precise brake cable adjustment. Compatible with most V-brake systems.
$6.99
- Extra long cable length - Road and MTB brake cable ends - 1.6mm x 1900mm
$6.99 - $54.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
$6.99
Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces
$6.99
Origin-8's Seat Binder Cable hanger provides optimal cantilever brake cable routing. It mounts to most seat binder bolts and allows you to run a rear cantilever brake on your cross or touring bike even without a stock cable stop. - Mounts to most seat binder bolts - Aluminum construction - Great for cantilever brake
$6.99
- MTB or Road - Stainless steel - 1.5mm diameter - 2000mm length
$6.99
- For mountain bike cable-actuated brakes - 1.5mm x 3000mm - Stainless steel
$6.99
Two-piece threaded cable tip contains the cable end without crushing it. CNC aluminum, no tools needed to install, reusable.
$7.00
RockShox's Reverb Cable/Hose Line Guides are a great way to route dropper posts on frames without integrated guides. They secure with a zip tie, and feature a wide mouth that allows for cable articulation as you drop and raise your post.
$7.00
- Wet or muddy condition cable sealing solution
$7.39
- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses
$7.95
The solution to organizing cables instead of them looking like a tangled mess on your handlebar Comes in a pack of five in various colors
$7.99
- Thermally bonded PTFE-coated slick galvanized cable for minimal friction - 1700mm
$7.99
Our Box One Inner Shift Cable is the perfect upgrade for your Box Three or Box Four cable. It is also an ideal replacement for your Box One or Box Two cable set-up. When combined with our Box One housing it has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Slick Coated - Inner Cable 2100mm - (2) 1.8mm Cable End Crimps COMPATIBILITY - Works with 11, 9, 7, 8, 12, and 10 speeds - Weight: 14.6 grams
$7.99
- BMX brake cable kits for front or rear application - 1.5mm galvanized inner slick cable - Cable length: 1700mm / 67-inches - Housing length: 1750mm / 69-inches
$7.99
- Jagwire disc brake hose parts protectors - Black - 5-pack
$7.99
- Stainless steel shifter cable - PTFE-coated for reduced friction - Length: 2000mm - 1.1mm compatible with Shimano, SRAM, and Campagnolo shifters - 1.2mm compatible with Shimano and SRAM shifters
$8.00
- Aluminum guides for securing housing/tubing to frame cable stops or cable guides
$8.00
Compatible cable for M2 Monolever.
$8.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.
$8.00
- Replacement front cable hanger - Steel construction - Includes barrel adjuster - Steerer Diameter: 25.4mm
$8.50
- Stainless steel slick extruded surface - 1.1mm x 2100mm - Pre-stretched for precise shifting - Permanent rust free performance - Shimano & SRAM compatible
$8.99 - $33.00
Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose
$8.99
- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake
$8.99
- Stainless steel die-pulled and polished slick gear cable for smooth, fast, accurate, and reliable shifting - SRAM/Shimano compatible head for both MTB and Road applications - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.1mm
$8.99
- Complete cable kits for internal three-speed hubs
$9.00
Keep housing, hose, and electronic wires tidy with Jagwire Wire Hooks. - 4mm / 4mm hooks - Connects 4mm shift housing or dropper housing, to 4mm E-bike control wire - Pack of 4 hooks
$9.00
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.
$9.39 - $14.99
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
$9.50
Giant's Teflon-coated stainless steel derailleur cable assures lightning-fast shifts and is pre-stretched for high responsiveness. This galvanized cable is double ended for use with Campagnolo or Shimano/SRAM drivetrains.