Cranksets

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0

- Material: Heat-treated 4130 Chromoly - Splines: 8 - Diameter: 19mm - Length: 5.7/8" (150mm) - Spindle Bolts: 8x1mm (Included) - Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks

• Compatible with mini hex chainrings

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

absoluteBLACK chainring bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Replacement bolts for 30T 104 BCD oval rings

- Includes replacement lower roller, 608 2Rs cartridge bearings, axle, bolts, and washers to fit Stinger and Dewlie chain guides

- Lower slider replacement parts for E-13 chainguides

- Service parts for E-13 chainguides

Spacers to insure proper chainline and chainring spacing on your bike. • 0.6mm thick • Sold in a bag of 20 spacers

Crank arm tip protectors for Origin8 Thruster Crank Arm Tip Protectors fit all Thruster Series MTB, Boost, and Fat cranksets. Grab a pair to protect your crank arm tips from abrasions and impacts.

- Forged aluminum replacement left arm only - JIS square 2-degree spindle taper

SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Cotterless

• Forged steel • Square taper • Compatible with 9/16" pedals • Pairs • Cotterless

- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 4

• Square taper interface • Only includes left crank

- Replacement bolt for DUB cranks

- Chrome plated CrMo steel chainring bolt/nut sets (Track is NJS approved)

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

- Compatible with 1/2" pedals - Forged steel - 24 TPI

• One-piece • 170mm • 24 TPI

- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 5

- Enables the use of various cranks with BB386EVO PF30 or BB30 bottom brackets - Spacers and adapters only specific bottom brackets are required and sold separately - Spindle Interface: SRAM GXP

• Square taper interface • Only includes left crank • 175mm length