Handlebar Grips/Tape

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

SRAM's Handlebar End Plugs are just the thing for adding a fun, custom touch to your handlebar taping job. They feature SRAM's famous and stylish S logo.

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

SRAM Racing Grips offer a great grip for total control and come in several sizes to fit your front-end setup. These durable rubber grips have stylish logos stamped in them and are built to last and not slip.

- Clear, gel pads provide added shock absorption while positioned between the lever hood and top-handlebar transition under handlebar tape - Two, left and right sets with integrated channels for either inside or outside, under tape cable routing

SRAM's SuperCork Bar Tape looks good and feels great. This light, stretchy tape is easily installed and adds a touch of class to any bike.

The 70X Gravity and E-Performance Grip offers the perfect grip ergonomics for experts. The gravity and downhill grip offers maximum control and grip in rough terrain, even in wet and muddy conditions. The special textured zone of the front and bottom side provides optimal support for the fingers. The exterior side ensures the needed comfort. The clamp is located inside and the clamping sleeve at the (inner) third of the grip. This increases the shock absorption and comfort on the hand’s outer side. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. The personal grip size is what matters. With the 7OX grip, the sizes differ in diameter and shape. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 132, 155 - Diameter at Smallest Point (mm): 97, 101 - Material: Proprietary Rubber Blend

Everything's Alright We think that the best path to a happy life is to ride as often as possible. These grips have the perfect combination of tackiness, durability, and cushioning to keep you in the saddle and on the sunny side of life. Special Recipe These grips are made of a proprietary rubber compound that only Race Face can make. We could tell you what's in them, but then we'd have to kill you. Hold Fast Designed to stay put, these low-profile grips have a lock-on collar, tapered internal sleeve and directional design—no drama here, just solid comfort. A Real Handful. Two diameters (30mm+ 33mm), 5 solid colors, 5 black with ano'd lock collar options. Don't worry—with the Getta Grip you get all the choices.

Pro's Smart Silicon Handlebar Tape is soft to the touch for top comfort. Plus, it's made of EVA foam for an excellent grip and total control even in the wet. This great tape is also durable and features adhesive backing for easy wrapping and a stay-put hold.

Century Gel Pads go under your bar tape to dampen road vibration for all day cycling comfort. Just say no to sore hands! • Four gel pads for under bar tape • Dampens vibrations • Maximizes comfort in all hand positions • For superior comfort use with Planet Bike Comfort Gel Tape (sold separately)

PDW Wraps with Silicone Grip take our much loved PDW Wraps to a whole new level of comfort! Like no other handlebar tape before, the PDW Wraps with Silicone Grip are constructed of durable tightly woven nylon, with added strips of clear silicone to provide superior grip and comfort. The woven nylon and silicone grip is layered over cush foam with a self-adhesive backing. The PDW Wraps With Silicone Grip make sure that both the style and comfort of your ride are decked out to the max!

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

Origin-8's Ergo Torq Grips provide a comfortable ergonomic shape with soft, dual-compound Kraton rubber. The 130/90mm split makes this set of grips ideal for use with a rear twist-shifter.

Ride with Origin-8's Ergo Torq Locking Grips and your hands, wrists, and arms will thank you. These ergonomic, dual-compound grips are made from soft Kraton rubber and feature anodized aluminum locking clamps for simple installation and removal.

Dual lock-on grip featuring oversized diamond pattern for mega grip and comfort - Anodized and lazer etched lock-ons

- Zig Zag pattern provides comfort and grip with or without gloves - Dual lock rings securely attach grip to bar - Outboard lock rings have replaceable integrated bar end caps - 130mm length with 30mm diameter grip area

Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge

The Elite Flow grips feature an offset design that provides more padding in certain areas to eliminate the need for a thicker grip. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included

- Aluminum clamps secure the grip on both ends with a hex-broach pinch bolts - For 22.2mm (7/8") bars - Packaged for 1 pair/set of grips and includes Snap Cap end plugs

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs. - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip compound for comfort and durability - The grip of choice for top athletes around the globe - Open ends with Thug Plug end plugs included

- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)

- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)

The extra material on MSW's EFG-100 grips isn't for good looks: it's to spread the pressure across more of your hand, resulting in less stress and fatigue. • Comfortable, ergonomic shape • Reduces hand fatigue while riding • Thermoplastic rubber

Traditional EVA tape looks great on the bike and feels comfortable on the hands no matter how long the ride. EVA tape is flexible and comes with an adhesive backing so it wraps well and stays put during and after installation. - EVA vibration-damping foam increases grip and comfort - Adhesive backing for perfect bar placement - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

Realize the epitome of grip and control with our thinnest bar tape. Minimal padding allows for maximum feel and handling while carving the corners of your local criterium.

Balance is the key to optimum performance in a stage race. Experience the perfect blend of grip and comfort that teams AG2R La Mondiale Pro Cycling Team, Lotto Soudal and Movistar Team use to win in the pro peloton.

The Charger Evo is the most complex grip we’ve ever created. Dual-patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. The single-compound grip makes application and removal easy in a grip that athletes can count on. Single Compound Grips include push in plugs. - Length: 140mm - Weight (with plugs): 108 grams - Diameter: Medium (31mm)

The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest single compound grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 112 grams - Diameter: 33.25 mm