- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, dependent on pedal thread length engagement
- Plastic nylon molded body - Chromoly spindle - 318g pair
Giant's Giant Toe Straps are made of durable nylon with chrome-plated steel buckles. The ends of the buckles are rubber-tipped to be easy on your fingers when you're adjusting the strap tension on rides.
- City/road half clips - With reflectors - No straps needed - Resin
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm
Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
- One-piece ABS resin body - Molded pins - 320g pair
$8.99 - $10.00
- Real leather material - Classic design fits most caged pedals
Dimension Nylon Toe Clips. Included instructions account for toe strap installation, but straps must be purchased separately - Toe straps are NOT included - Sold as a pair
- One-piece ABS resin body - Non-slip rubber surface - Boron spindle - 388g pair
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
RaceFace Chester Pedal Pin Kit 20 Pins Black
- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer
- Nylon clips - Woven straps - For ATB or hybrid use
- One-piece resin body with rubber surface for grip - Boron spindle - 400g pair
- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)
- Heavy-duty nylon toe straps with classic style steel buckles - Narrow design fits most cage style pedals - 460mm length
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length
Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips
$11.00 - $11.50
Giant's Plastic Toe Clips and Straps feature durable and rustproof nylon clips and strong nylon straps with chrome-plated steel buckles. The ends of the buckles are rubber-tipped to be easy on your fingers when you're adjusting the strap tension on rides.
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
- Chrome plated steel body and cage - Built in reflectors
- One-piece nylon body - Chromoly spindle - Toe clip compatible - 407g pair
- 1-Piece, molded, cage-style body - Loose ball bearings - Accepts toe clips/straps - Spindle Material: Chromoly - 305g
Features - Chromoly spindle - Toe clip compatible
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.
Replacement pin set for Race Face Atlas and Aeffect pedals.
Origin-8's Look Delta Cleats are compatible with Look Delta-style pedals. - These cleats use the Look/SPD-SL bolt pattern.
Origin-8's Look Delta Cleats are compatible with Look Keo-style pedals. They feature 9-degrees of float. - These cleats use the Look/SPD-SL bolt pattern.
- One-piece resin body - Barefoot friendly rubber surface - Includes reflectors
- One-piece resin bodies - Barefoot-friendly rubber surfaces - Boron-steel axles - No reflectors - 400 grams/pair
$13.99 - $20.00
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Replacement pedal pins for Chromag pedals. Includes 40 pins.
Giant's AC Toe Clips and Straps includes two durable chrome-plated steel clips, mounting hardware and a pair of quality leather straps with chrome-plated steel buckles.
- One-piece resin body with rubber surface for grip - Boron spindle - 446g pair
$14.19 - $15.19
- Fits most MTB shoes - For clipless SPD-style pedals - 4-degree float
- Cleat covers to avoid wear and provide stability and grip while walking - Lightweight, flexible and durable
- SPD compatible - Single release - Hardware included
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
$15.00 - $19.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.
Dimension City Pedals. - Built-in reflectors, will not accept toe clips - Molded nylon; 1-piece, caged-type pedal - Slip-resistant surface
Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g
The Keo Cover protects your cleats while walking. They are compatible with all Keo Grip cleats and Keo Cleats. – Cleats protection – Anti-slip – Compatible with all cleats
- Replacement cleats for X-Track pedals
- The X-TRACK EASY CLEAT offers a larger clip out range with a lateral and angled release possibilities
- Nylon body and anodized aluminum cage - Chromoly spindle - Quick flip cage design - Toe clip compatible - 288g pair - 9/16-inch
- Chrome plated steel strapless toe clip - Hardware included
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
- Nylon construction - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 36 grams per pair
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. - 4 degrees of float both inward and outward
$17.00 - $22.99
While staying true to the original Twisted PC’s style, the Twisted PRO offers a significantly larger body shape, slimmer height, and more concave while still being built around a traditional loose-ball bearing configuration. Features: - High-strength Nylon composite - 12 oversize pins per side - Traditional loose ball bearings - Chromoly spindle - High-strength plastic composite - Wider & longer pedal body - Larger concave area - Slimmer profile Specs: - 9/16-inch spindle - 104mm Width - 98mm Length - 14.6 oz (pair)
Serfas' MTB Cleats are durable steel replacement cleats for use with Shimano SPD-compatible clipless pedals and shoes. They offer 4 degrees of float and weigh 73 grams per pair. If your old cleats are Shimano model SH51, SH55 or SH56, these replacements will work. Installation hardware is included.
- Forged alloy body and cage - Chromoly spindle - Toe clip compatible - 391g pair - 9/16-inch spindle
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
Page 1 of 5 Next page