Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Seatposts
$200.00
The newly redesigned EC90 SL ISA Seatpost takes our superlight unidirectional carbon and applies our patent pending Independent Saddle Adjustment, allowing for perfect fitment with independent seat angle and fore-aft movement. ISA allows you to refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. Coming in at 195g, the new EC90 SL ensures a secure fit and a super light upgrade for your dream build.
- EC90 Carbon mast with full carbon head
- ISA - Patent pending Independent Saddle Adjustment
- Taperwall technology
- Finish: Matte Black UD Carbon
- Length: 350mm with 80mm Min Insert
- Material: EC90 Carbon
$633.00
The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit.
- New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel
- ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel
- Two travel options to choose—50mm or 75mm
- Saddle clamp options compatible with 7x10 oval carbon rails.
- Seat post length includes 400mm and 350mm (50mm drop only)
- AXS Technology allows rider customization via the AXS Mobile App
- AXS handlebar controls (drop or flat bar)
- Shared battery with all other SRAM AXS enabled components
- System is completely waterproof and dustproof to IP69K—take it anywhere
- SRAM AXS battery and charger included
SPECIFICATIONS:
- TRAVEL: 50mm, 75mm
- POST DIAMETER: 27.2mm
- POST LENGTH: 350mm, 400mm
- REMOTE: AXS Controller Sold Separately
- SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9)
- WEIGHT (G): 562
- WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g
$259.95
The WCS Carbon LINK FlexLogic post brings more compliance, increased versatility, and a lighter weight to the legendary Ritchey Two-Bolt seatpost system design. This post has a 15mm offset, and the patented LINK clamp is reversible and fits all standard saddle rail designs. The carbon layup used for the Carbon LINK FlexLogic was originally developed for top-level Pro Tour teams and is 15% more vertically compliant than other layups, with no loss of lateral or torsional stiffness—perfect for racing in the Alps during the Tour de France or riding along your local gravel roads.
- Material: carbon fiber
- Diameter: 27.2, 30.9, 31.6mm
- Total length: 300, 350, 400mm (including 100mm of minimum insert)
- Offset: 15mm
- Saddle clamp: standard rails
- Saddle clamp torque: 15Nm (max)
- Seat collar torque: 6Nm (max) / 7Nm (max) for Ritchey steel frames
- Weight: 195g (27.2x350mm)
- Color: matte UD carbon finish
$89.99
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio
- Race Face's triple butting design maintains strength in critical areas while reducing overall weight
- The tube is anodized & shot peened for increased fatigue life
- Updated Hunter head design for easy saddle installation and full adjustability
- 3D forged from 2014 heat treated aluminum with triple butted mast
- Thumbscrew tightening system allows quick dial-in of the saddle angle by hand
- Angled clamp bolts allow easy tool access for hassle free adjustment
- Rubber grommet seals the post to prevent water from entering seat tube
- Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
$104.95
Carbon seatpost with a proven low-profile, 2-bolt clamp that won't bottom out on the saddle.
- Low-profile clamp reduces stress on lightweight rails
- 2-bolt design securely holds the saddle in place and is easy to adjust
- Offset: 25mm
- Clamp Style: Standard Rails
- Material: Carbon
$35.99
- PIVOTAL compatible
- Polished stainless steel shaft
- Durable and weather resistant finish
- Reinforced shaft design for strength
- Outer Diameter: 25.4mm
- Length: 250mm
- Setback: 0mm
$100.00
Bike fit is important. A bike should feel like an extension of the body, especially when dialed-in. Getting just the right saddle position is second-to-none when putting out power over long miles. Ritchey Link posts offer two clamp positions for greater adjustability in dialing-in the right fit.
- 7050 Alloy 2pc Press Fit Head
- 20mm adjustable setback
- Reversible clamp for greater fore/aft adjustability
- Length: 350mm
$179.00 - $200.00
The Coast dropper is the world's first Suspension Dropper Post, combining ride-smoothing suspension and the benefits of a dropper into one seatpost. This dropper is designed to help riders on all types of bikes, from packed-up trekkers, to the cross-country wanderers, even the weekday commuters.
We developed the Coast because the earth isn't flat (no matter what those people on Twitter say)—it's kind of bumpy. And, while we all like coasting along on freshly paved roads, mountain paths are enticing, and potholes exist no matter how much we swear at them. The Coast Post was designed to soak up some of these vibrations. We accomplished this via 40mm of tunable air suspension housed in the internals to make your ride a bit smoother.
While this post provides some relief from everyday chatter, it also comes with up to 120mm of drop. Most people associate dropper posts with mountain biking, but it turns out they're pretty jazzy on everything, from gravel bikes to trekking rigs and commuters. Let's face it, when your saddle is at the proper height for riding, dismounts can be…inelegant. A dropper post allows you to push a button and be in a flat-footed position when you want, easily returning you to the best saddle height for riding once you get going again. This can be great for starting and stopping in city traffic or getting on and off a bike packed up with stuff—or really, if your hips are just extra tight and creaky like ours.
Plus when you're going downhill, a dropper easily gets the distraction of your seat out of the way, letting you lower your center of gravity. Not only does this put you in a safer riding position, it also makes descents more fun (we wish this safer-but-also-more-fun combo was true for more things in life).
- Air Suspension: 40mm
- Weights: 31.6/30.9 External routing - 615g, 31.6/30.9 Internal routing - 610g, 27.2 External routing - 540g, 27.2 Internal routing - 535g
- Cable Routing: Internal
- Cartridge: 2-chamber hydraulic and adjustable air
- Lever sold separately
- 3-year warranty
- Perfect for commuters, gravel bikes, or hardtail bikes
- NOTE: This is NOT a replacement for rear suspension, it is a suspension seat post that helps absorb the larger bumps while seated. It does not provide small bump compliance found in rear suspension mountain bikes.
$325.00
ENVE has found that a dropper seatpost can enhance the gravel experience and that 40mm of drop is just the right amount for most gravel riding and racing. A dropper post allows the rider to lower their center of gravity on descents which can result in greater control and therefore confidence. While designed primarily for gravel riders, the G Series Dropper allows XC riders and racers a lightweight dropper with just the right amount of drop.
- 395 grams (can be trimmed for an additional 40 grams in weight savings)
- Mechanical actuation - Internal Routing Only
- 40mm of drop/travel
- 350mm length (Min Post Height: 140mm seat post clamps saddle rail
- 27.2mm diameter post (Includes shims for 30.9mm and 31.6mm posts)
- Fully serviceable, no special tools required
- Compatible with all cable actuated remote levers
$205.00
The all-new carbon Contact SLR TCR seatpost compliments the redesigned TCR’s outstanding performance though optimal aerodynamics and ultra-light weight.
- Optimized for maximum aero performance at a super low weight
- Compatible with model year 2021 and on TCR frames
- Not compatible with pre-model year 2021 TCR frames
$250.00
The all-new Highline XC/Gravel delivers infinite adjustment, smooth feel, and easy installation.
- 27.2mm seatpost diameter to fit most XC and gravel bikes
- Jagwire cable and housing
- Self-contained IFP hydraulic cartridge
- Internal routing
- Quick-connect mechanism for ease of cable installation
- Linear actuator for quick return speed
- 2-bolt standard head
- Drop Bar Remote sold separately
$59.95
Proven 2-bolt design provides a class-leading balance between strength, weight, and easy adjustability. The low-profile clamp reduces stress on lightweight rails and won't bottom out.
- 3D Forged 6061
- Length: 400mm
- 25mm offset
- 43x38mm cradle
- Finish: Matte Black and Hi-Polish Black
- 250g (27.2/300)
$169.95
The redesigned Zero post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it.
- Carbon Construction with alloy clamps
- Fore/aft adjustment bolts for precision adjustment and secure clamping
- Zero offset
- Length: 400mm
- 200g (27.2x400)
$85.00
- Giant proprietary D-Fuse seatpost
- Composite construction with Alloy clamp
- Zero offset configuration
- 380mm length
$200.00
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel
$169.95
The newly redesigned Trail post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether your hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it.
- Carbon Construction with alloy clamps
$230.00
The minimal design of the ShockStop Seatpost blends seamlessly with the aesthetic of modern gravel, road, and e-bikes. Along with the ShockStop Stem, this system works together to reduce fatigue and strain, letting you ride further, faster, and more comfortably.
Benefits:
- Go further—reducing fatigue from bumps and vibrations
- Ride faster—energy that is normally wasted suspending your body is converted into forward motion
- Take control—customize your suspension feel to float over obstacles and maintain control
Details:
- 35mm of active suspension travel
- Infinitely adjustable stiffness via pre-load adjustment and swappable springs
- Adjusting stiffness / pre-load does not reduce travel
- Swappable springs included to accommodate varied rider weight and preference
- Optimized linkage geometry provides ultra-responsive suspension feel
- Check technical specifications for compatibility
What's in the Box:
- 1 x ShockStop Seatpost
- 2 x springs (1 pre-installed, 1 included in box for increased stiffness)
- All required hardware
$53.99
The directional butting of the Energy SBS SB20 seatpost’s 6066-aluminum shaft gives it thicker walls fore and aft for stiffness and thinner walls at the sides to cut weight. A forged and machined alloy head is bonded to the top of the shaft.
- 3D forged and CNC machined AL6066 w/ alloy head
- Directionally butted for low weight and additional strength
- Chromoly hardware
- Clamp Style: Standard Rails
$59.00
- 6061-T6 construction w/forged alloy head
- 45mm adjustable preload suspension travel
- 2-Bolt Zero Offset head clamp
- Up to 300 lb rider weight
- EN MTN safety approval
- 385g (27.2mm x 350mm)
$119.99
- Carbon fiber mast with micro clamp aluminum head
- One bolt adjusts tilt and fore-aft saddle position for micro tuning which allows for superior comfort and performance (no-offset clamp)
- Unsurpassed strength to weight ratio
- Specific to I-Beam saddle
Previous page
Page 3 of 3