Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Stems

$69.99
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: In this particular model stem we’ve tailored the Oversized strategy to favor utility and access. The geometry has been altered to allow for easy handlebar removal while at the same time scavenging material from low stress zones. Ideal for those who don’t want to compromise on user experience to gain performance. These stems are engineered for the larger-sized racers.

$79.99 - $99.99
Hollow stems are cold forged from the highest quality 6061-T6 aluminum available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218 grams/7.7 ounces. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, we reduced the weight and size and eliminated a serious hazard to the rider’s knees.
These stems come with either a 48- or 53mm extension and a 22.2mm bar bore. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. Not compatible with forks that have carbon fiber steerer tubes.

$22.00
With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem.
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm

$23.99
This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.

$35.99
The DefendR BMX threadless stem has a AL6061 forged alloy construction and a 4-bolt face clamp.
- 30mm stack height
- 240g

$39.99
With its alloy/steel construction and 4-bolt clamp design, the Freestyle is a trusty BMX quill stem.
- Hollow-core stem bolt
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm

$41.99
The BrickTop alloy stem is a classic style, top-mount BMX stem with a 4-bolt handlebar clamp.

$64.99
Cult Redemption stem, for when you want a topload stem but without so much rise.
- Wider and beefier than the OG Salvation stem
- Improved clamping area
- Recessed compression bolt for a clean look
- Bar Clamp Diameter (mm): 22.2
- Steerer Clamp Diameter: 1-1/8" ins

$64.99
Wider and beefier with and improved clamping area and recessed compression bolt for a clean look.
- Bar Clamp Diameter (mm): 22.2
- Steerer Clamp Diameter: 1-1/8" ins
- Stem Type: Top Load

$229.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother.
- Weight: 225g - 235g
- Angle: -6° (only)
- Stack Height: 49mm
- Stem Clamp: 31.8mm

$22.75
$32.50
30% Off
Designed for use with Cannondale's Headshok (sold separately), the Headshok Stem is tough, light, and ready to ride.
- Sleek styling with maximum strength and stiffness
- Forged from a single block of lightweight 2024 aluminum with our patented OPI 3D forging process, these stems are exceptionally light and strong
- 31.8mm clamp interface
- Weight: 185 grams (100mm length)

$35.00
Fully integrated.
A convenient mount on the stem securely holds SP-Connect compatible smartphone cases and adhesive mounts to put all of your data in an optimal position.
Where it thrives:
The open road, leisurely rides, in town
What it's built for:
Compatibility, durability
Highlights:
- Compatible with SP Connect smartphone cases and adhesive mounts
- Integrated mount
- Range of sizes

$40.00 - $70.00
Cannondale's 1.5-inch Stem comes in plenty of options to fine-tune the fit on your bike. This stem works with larger 1.5-inch steerers, frequently found on Cannondale's front-suspension bikes. Using Cannondale's One-Piece-Integration process, it's made of a single piece of durable, lightweight 2024 aluminum.

$55.00
Descend with confidence.
The perfect match for any trail or enduro bike paired with the HollowGram SAVE Riser 35mm handlebar for increased descending prowess.
Where it thrives:
Challenging trails, down hills
What it's built for:
Control, confidence
Highlights:
- 35mm clamp size
- 37mm length
- 0° degrees rise

$55.00
The workhorse.
Whether you're upgrading your stock parts or looking for something a bit more eye catching, the alloy ONE stem delivers.
Where it thrives:
The open road, gravel roads, up and down hills
What it's built for:
Agility, control
Highlights:
- Lightweight aluminum construction
- Wide range of sizes
- Eye-catching and sleek design

$150.00
Waste not, want KNØT.
Part of the KNØT SystemBar, this aluminum stem helps save six watts over a traditional round handlebar. Not only that, you can adjust the bar position. Have cake. Eat cake.
Where it thrives:
The open road, up and down hills
What it's built for:
Aerodynamics, control
Highlights:
- One-piece looks, two-piece function
- Wind tunnel proven, hides cables
- Compatible with 2019+SuperSix EVO

$150.00
System = speed.
Paired with the SAVE or KNØT SystemBar, you end up with the speed and good looks of a one-piece system with the adjustability of a two-piece.
Where it thrives:
The open road, up and down hills
What it's built for:
Aerodynamics, efficiency
Highlights:
- Integrated computer mount
- Compatible with most bicycles
- One-piece looks, Two-piece function

$90.00
- 6061 premium alloy
- Designed to be light and strong
- Enduro/DH focused
- 31.8 & 35mm clamp

$99.00 - $107.00
Chromag's HiFi stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 200 grams - Low stack height

$104.00
Chromag's HiFi V2 stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 175 grams (35mm length) - Low stack height

$121.00
Strong, light and elegant. Chromag's longest running stem, the Ranger, has a refined body shape that represents their own advancement in 3D modelling and CNC profiling. The Ranger is stronger and stiffer for today’s increased demands with blended body features to increase performance with a more fluid look. The Ranger evolves with the same physical fundamentals, more flow, and increased strength. Starting at 140g, the Ranger is light yet extremely stiff for positive control at the front end.

$94.99
The Cavity stem was developed with pain staking focus on strength, function and attention to detail. Tapered body for cleaner lines and weight reduction, multiple internal and external machining processes to reduce every gram possible and chamfered edges throughout for stunning detail.

$94.99 - $105.00
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem.
- Designed for all applications from All MTN to Slopestyle and anything in between
- CNC Machined from a solid block of 6061 T6 Aluminum
- Exceptionally detailed chamfered edges and channels throughout
- 55mm wide clamping platform

$104.99
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem.
- Designed for all applications from All MTN to Slopestyle and anything in between
- CNC Machined from a solid block of 6061 T6 Aluminum
- Exceptionally detailed chamfered edges and channels throughout
- 55mm wide clamping platform

$29.99 - $37.00
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g

$29.99 - $32.00
Dimension 26.0 Stems
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Fully forged AL-6061-T6
- 4-bolt handlebar clamp
- Weight: 140g-180g

$30.00 - $37.00
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Page 1 of 8
Next page