Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp Disc Wheel Valve Cover Patches
$6.00
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.
Zipp AM Rim Tape
$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
Zipp Tangente Tube Wrench
$7.00
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Zipp Sapim CX-Ray Straight Pull Spokes and Nipples
$10.80 - $20.00
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
Zipp Sapim CX-Sprint Straight Pull Spokes and Nipples
$11.35
Straight pull spokes and nipples from Zipp
Zipp 77/177 Disc Conversion Caps
$17.10 - $27.00
Zipp Speed Weaponry Hub Conversion Caps
Zipp Decal Set
$20.00
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Zipp Rotor Protector
$20.00
Help ensure your rotors are not damaged, contaminated in transit, or in storage with this simple solution. This also helps protect anything that may come into contact with the rotor during transport. - Protects rotors during transit - Neoprene cover to protect against water and grease - Reinforced gusset and drawstring to protect the edges of the rotor and to cinch down tightly during transit
Zipp Tangente Quick Release Skewer Set
$50.00 - $91.00
Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set
Zipp Tubeless Kit
$58.00
- Kit includes tape, 2 valves & 1 valve core wrench
Zipp Single Wheel Bag
$71.00
- Holds one wheel securely for transport (up to 700c with 35mm CX tire installed). - Connects to second Zipp Connect wheel bag to transform into a double wheel bag. - Sturdy water-resistant EVA construction. - Includes removable axle/QR pocket.
Zipp 11-speed Freehub Body for 30/60 Wheels
$72.00
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Zipp 11-speed Freehub Kit for 177 Hub
$95.00 - $140.00
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Zipp Cognition Freehub Kit
$116.30 - $133.00
Freehub bodies for Zipp Cognition hubs.
Zipp 11-Speed Freehub Kit for 2013 - Current 188 Hub
$136.00
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
Zipp Connect Wheel Bag
$163.00
Each bag holds one wheel (up to 700c with 35mm cyclocross tire) for transport. It also connects to a second Zipp Connect wheel bag (sold separately) to form a double wheel bag. - Sturdy, water-resistant EVA construction with distinctive molded Zipp graphics. - Integrated carry handle and detachable shoulder strap. - Removable internal pocket for storing quick-release skewers and axle end caps. - Padding holds wheel in place.
Zipp Conversion Kit Super 9 Disc 10-speed to Track for 188 Hub Silver
$176.00
Zipp Speed Weaponry Rear Axle Conversion Kit - Converts a road disc into a track disc rear - Disc must have silver, NOT black flanges - Fits 188 disc hub only - cannot be used on 900 or Sub-9 discs - Fits Zipp Super-9
Zipp Conversion Kit 10 – 11-speed 188 SRAM
$200.00
Zipp Speed Weaponry Rear Axle Conversion Kit - Not to be used on 188 V6 or earlier rear hubs - Only to be used to convert Zipp's 188 V7 10-speed rear hubs to 11-speed
Zipp Conversion Kit 11-speed to Track 188 Black
$205.00
Zipp Speed Weaponry Rear Axle Conversion Kits - Converts a road disc into a track disc rear - Fits black 2013 188 V8 disc hubs only - Fits Zipp 900 and Super-9 Discs
Zipp CeramicSpeed Freehub Body and Bearing Kit: 177 SRAM/Shimano Cassette Hub Body
$363.00
- Kits include Freehub body with CeramicSpeed bearings pre-installed for easy installation onto the wheel - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
Zipp CeramicSpeed Freehub Upgrade Kit ZIPP 177
$363.00
- Lowest resistance hybrid ceramic (ceramic balls and steel cages) available - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Kits include Freehub body with CeramicSpeed
Zipp 30 Course Disc Brake Front Wheel (Clincher)
$445.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.
Zipp 30 Course Rim-brake Clincher
$445.00 - $555.00
Performance, durability, and versatility. Zipp checks all the boxes with its 30 Course Rim-brake Clincher wheelset. A wide 21mm internal rim profile delivers speed, stability and comfort over a variety of surfaces, and Zipp's 71/177 hubset provides smooth and efficient power transfer. Sapim CX-Ray spokes and redesigned ergonomic skewers round out this excellent all-around package. Each wheel includes rim tape, a tubeless valve, and a 1.85mm spacer for use with 10-speed cassettes.
Zipp 30 Course Disc Brake Rear Wheel (Clincher)
$555.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.
Zipp 30 Course Disc Brake Rear Wheel (Tubular)
$555.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more.
Zipp 404 Firecrest Carbon Clincher Wheel
$672.00 - $1,150.00
Zipp's 404 Firecrest Carbon Clincher wheelset is a testament to all-around advancement in wheel design. Its 58mm aero depth and wide profile provides proven performance in all situations, and at 1,690g (700c), you'll feel confident staying the course in less-than-ideal conditions. Whether you're looking for everyday riding performance or a race day wheelset to stay ahead of the pack, the 404 Firecrest has a great balance of weight, stability, and efficiency that complements strong riders. Zipp's 77/177 hubset, laced with Sapim CX-Sprint spokes, provides maintenance-free reliability and lateral stiffness, while trusted stopping power is supplied via Tangente Platinum Pro Evo brake pads. Included with each wheel are a Zipp-integrated Valve Extender with valve-core wrench, rim tape, and quick release.
Zipp 3ZERO MOTO 27.5-inch Tubeless Front Rim
$700.00
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 3ZERO MOTO 27.5-inch Tubeless Rear Rim
$700.00
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 3ZERO MOTO 29-inch Tubeless Front Rim
$700.00
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 303 Firecrest Tubeless Disc Brake 700c Front
$925.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
Zipp 202 Firecrest Carbon Clincher Wheels
$950.00 - $1,150.00
The Zipp 202 Firecrest Carbon Clincher retains a classic 32mm rim depth, but with a sturdier 25.4mm rim width for all-around use. This legendary climber's companion weighs just 1,450g, and features Sapim CX Sprint spokes to optimize torsional and lateral stiffness. Laced to the maintenance-free Zipp 77/177 hubset, you can count on best-in-class durability no matter where you decide to ride. Confident stopping power comes from a combination of heat-resistant resin used in the 202's construction and Tangente Platinum Pro Evoke brake pads that provide all-conditions reliability. Zipp includes an integrated valve extender with valve-core wrench, rim tape, and quick release.
Zipp 3ZERO MOTO Carbon Tubeless 27.5-inch Front
$950.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 3ZERO MOTO Carbon Tubeless 29-inch Front
$950.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 303 Firecrest Carbon Tubeless Disc Brake 700c Rear
$975.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
Zipp 3ZERO MOTO Carbon Tubeless 27.5-inch Rear
$1,049.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 3ZERO MOTO Carbon Tubeless 29-inch Rear
$1,049.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 808 Firecrest Carbon Clincher
$1,100.00 - $1,300.00
Zipp optimized its Firecrest technology to build a highly aerodynamic 82mm rim—the 808 Firecrest Carbon Clincher. Designed for efficient power transfer and stable control in time trial and triathlon competition, the 808's wide 27.5mm rim shape provides confident tracking in crosswinds and over rough surfaces. Built with Zipp's excellent 77/177 hubset that features optimized flange geometry and Sapim CX-Sprint spokes to increase lateral stiffness, this 1,1885-gram wheelset combines toughness and reliability in a wind-shedding package that has to be ridden to fully appreciate. Each wheel includes specially-designed Tangente Platinum Pro Evo brake pads, Zipp Integrated Valve Extender with valve-core wrench, rim tape, and quick release.
Zipp 202 Firecrest Carbon Clincher Tubeless Disc Brake 700c Front
$1,150.00
The 202 Firecrest Carbon Clincher is a stiff, lightweight and aerodynamic speed weapon ideal for every road. That's the power of Firecrest and Carbon Clincher technologies. The new 202 is the lightest entry in the Firecrest Carbon Clincher lineup, a do-it-all classic road wheel. - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance - 77D hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, sprinting stiffness and light weight - Tubeless ensuring secure performance even when ridden at lower tire pressures - Max recommended rider weight 250lbs - Max tire pressure 125psi Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, 15x100 dropouts for front wheels
Zipp 808 Firecrest Carbon Tubeless Rim Brake Front
$1,150.00
Zipp's 808 Firecrest Tubeless rim-brake wheels make you faster with an 82mm rim depth that's fast, stable in crosswinds, and now tubeless ready. That means you get all the aero benefits with having the ability to run lower tire pressure for increased cornering grip and compliance and reduced rolling resistance, without the risk of pinch flats. These wheels are infused with technologies developed in our Indianapolis advanced development lab—Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency, and Zipp's ShowStopper textured braking surface delivers unrivaled rim braking performance in wet or dry conditions. At the center of the 808 Firecrest Tubeless rim-brake is a versatile and durable new hubset, the German-engineered ZR1. - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - ShowStopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions - Tubeless technology ensures secure performance even when ridden at lower tire pressures - New ZR1 hub is engineered in Germany with better seal design for improved durability - New Zipp graphics and cosmetic identity that scream speed - Ships with QR end caps and quick release skewers
Zipp 404 Firecrest Carbon Clincher Rim-Brake Rear Wheel
$1,200.00
If you had to choose just one wheel, the 404 Firecrest Carbon Clincher should be your choice. With the depth and shape proven in all conditions, it’s the all-around performer and the standard by which all other wheels are measured. Its 58mm rim depth is a classic that has carried athletes to victory in every kind of event and situation – every triathlon distance, breakaways, field sprints, and hilly finishes. At the center of the 404 Firecrest is Zipp’s 77/177 hubset with best-in-class durability, bearing protection with no pre-load adjustment needed. The result is improved braking (Showstopper), aero performance, stiffness, durability, simplicity, and versatility. - New, faster, more stable rim profile - AeroBalance - ABLC SawTooth dimples pattern - Showstopper brake track - 10- or 11- speed compatible - XDR option - Handcrafted in the USA
Zipp 202 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,350.00
The 202 Firecrest Carbon Clincher is a stiff, light weight and aerodynamic speed weapon ideal for every road. That's the power of Firecrest and Carbon Clincher technologies. The new 202 is the lightest entry in the Firecrest Carbon Clincher lineup, a do-it-all classic road wheel. This wheelset includes the 77/177 hubset. Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, and 12x142 dropouts for rear wheels - Freehub body spacer – 11 to 10 speed - SRAM XDR driver body for 177D available separately
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 650b Rear
$1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
Zipp 808 Firecrest Carbon Clincher Rim-Brake Rear Wheel
$1,350.00
Optimizing wheels to perform with precision and control at the depth of the 808 Firecrest Carbon Clincher is pure engineering science. While the 808 Firecrest’s aerodynamics and stability are proven every weekend in road races, triathlons and time trials around the world, understanding how profoundly good these wheels only comes from riding the wheel that, as a set, have proven faster than any other. At the center of the 808 Firecrest Carbon Clincher is Zipp’s 77/177 hubset with best-in-class durability and improved bearing protection with no pre-load adjustment needed. The result is improved braking (Showstopper), aero performance, stiffness, durability, simplicity, and versatility. - New, faster, more stable rim profile - AeroBalance - ABLC SawTooth dimples pattern - Showstopper brake track - 10- or 11- speed compatible - XDR option - 77/177 hubset - Handcrafted in the USA
Zipp 808 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,500.00
There’s nothing middle of the road about the 808 Firecrest. At 82mm deep, it’s all out aero. Thanks to refinements to Zipp’s revolutionary Firecrest rim shape to be tubeless compatible and optimized for wider tires, the 808 Firecrest Carbon Clincher Tubeless Disc brake is ideal for the new era of disc brake road riding and racing. Without the constraints of rim brake caliper compatibility or brake-track requirements, the Firecrest Carbon Clincher Tubeless Disc-brake wheels offer the increased stopping power and modulation of disc brakes and a whole lot more. To maximize the aero performance of the wheels, Zipp’s ABLC dimples extend all the way to the outer edge of the disc-specific rims. The wheels are also optimized for wider tires to meet the performance needs of modern riders in search of low rolling resistance and aero efficiency with high comfort. The deeper Firecrest Tubeless Disc brake has an internal width of 19mm and are aerodynamically optimized for 25mm wide tires. This design improves Firecrest’s ability to yield low aerodynamic drag and high crosswind stability, a combination called AeroBalance. Designed to be tubeless compatible, the wheels feature a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance even when ridden at lower tire pressures. Zipp’s low rolling resistance and high grip Tangente RT28 and RT25 Road Tubeless tires pair well with the Firecrest disc brake wheels. A new carbon fiber layup for the Indianapolis-made rims keeps weight low while maintaining the Firecrest Carbon Clincher’s proven durability. The robust 77D/177D hubset, paired with 24 Sapim CX-Sprint spokes front and rear, keeps the wheels stiff and responsive. To ensure compatibility with any bike, the versatile 77D/177D hubs come with swappable end caps to work with QR’s and thru-axles, including 12x100mm and 15x100mm front thru-axles as well as 12x142mm rear thru-axles. The 177D rear hub is also XDR driver body compatible for use with SRAM 10-42 cassettes. Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, 15x100 dropouts for front wheels, and 12x142 dropouts for rear wheels - Freehub body spacer – 11 to 10 speed - SRAM XDR driver body for 177D available separately
Zipp Super-9 Disc Carbon Rear Wheel (Clincher)
$2,731.00 - $2,875.00
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
Whisky Parts Co. Stainless Spoke Nipple Washer
$5.00
Stainless spoke nipple flat washers from Whisky. - .3mm Thickness
Whisky Parts Co. Tubeless Rim Tape
$8.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
Whisky Parts Co. Tubeless Conversion Rim Tape Kits
$9.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
Whisky Parts Co. 100w Rim Decal Kit
$25.00
- Colored rim decal kits to personalize your ride - Decals to fit 2 100w 26-inch rims
Whisky Parts Co. 50w Rim Decal Kit
$25.00
- Colored rim decal kits to personalize your ride - Decals to fit two (2) 50w 27.5+ rims
Whisky Parts Co. 70w Rim Decal Kit
$25.00
- Colored rim decal kits to personalize your ride - Decals to fit two (2) 70w 26-inch rims
Whisky Parts Co. No. 9 Thru Bolt
$39.95
Ultra light bolt on thru axle, with a low profile 6mm head for Whisky forks and some others. See other manufacturers specifications for fitment questions. - Thread Length (mm): 12 - Thread Pitch: 1.5 - MT/CX: 125 x 15mm - MTB+: 135 x 15mm - Fat: 198 x 15mm - RD/CX: 120 x 12mm - Rear: 167 x 12mm
Whisky Parts Co. No. 9 Carbon 30d 700c Rim
$450.00
Whisky's No.9 30d road rims are designed to offer leading edge, tubeless performance on or off-road. These rims offer lightweight, stable platforms to build exquisite wheels. Its wide internal width pairs exceedingly well with a broad range of tires and provides versatility no matter what surface you’re riding. These disc brake-specific rims offer clean design and aesthetics. From tarmac to gravel, brevets to the CX course, this rim is Whisky's lightweight go-to for all round, drop bar performance. As with all rims they make, these come with tubeless valves and required tape in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
Whisky Parts Co. No. 9 Carbon 36w 27.5-inch Rim
$450.00
Whisky's No.9 36w rims are their choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires, and offer lightweight performance across the board. These highly-versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims Whisky makes, these come with tubeless valves and tape required in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
Whisky Parts Co. No. 9 Carbon 36w 29-inch Rim
$450.00
Whisky's No.9 36w rims are their choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires, and offer lightweight performance across the board. These highly-versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims Whisky makes, these come with tubeless valves and tape required in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
Whisky Parts Co. No. 9 Carbon 50d 700c Rim
$450.00
Whisky's No.9 50d rims are designed to a be a lightweight, aero, stable starting point to build exquisite wheels. They offer an aero advantage over the 30d rims, while offering a stiffer, more robust platform. Fit for long days in the saddle, cutting through the wind and hammering finish line sprints, they’re a perfect all-rounder. These disc brake-specific rims offer clean design and aesthetics. Featuring a wide inner width, they pair well with a variety of tires across the full range of drop bar pursuits. As with all rims Whisky makes, these come with tubeless valves and required tape in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
Whisky Parts Co. No. 9 Carbon GOAT 27.5-inch Rim
$450.00
Whether it’s 'cross, road, or mountain, nothing makes your bike feel faster than a good set of wheels. The Whisky No.9 carbon rims are performance-driven designs that offer excellent durability and features to create a torsionally stiffer rim, compared to single wall carbon offerings. Available in multiple sizes and widths, Whisky’s rims have you covered no matter what or where you ride. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
Whisky Parts Co. No. 9 Carbon Mountain 30w 29-inch Rim
$450.00
Whisky's No.9 30w rims are the most versatile performance rims they offer. A 25mm internal width works well with tires from wide and plus road tires to full-on mountain bike tires. Whisky offers this rim in both 650b/27.5” and 700c/29” sizes, so there’s one to fit any bike in your stable. These rims feature hookless beads designed for easy tubeless set up and impact resistance. Light and wide, they offer great performance and versatility. As with all rims Whisky makes, these come with tubeless valves and tape required in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
Whisky Parts Co. No.9 50d Carbon Tubular 700c Rim
$450.00
No.9 50d rims are designed to a be a lightweight and stable starting point to building exquisite wheels, featuring a wide inner width that pairs well with a variety of tire sizes. They offer an aerodynamic advantage over the 30d rims, creating a stiffer, more robust platform. Fit for long days in the saddle, cutting through the wind and hammering finish line sprints, they’re a perfect all-rounder. These disc brake-specific rims show up in style with a clean design and aesthetics. - Tubular Rim design - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs - Max tire pressure 130psi - For tires 25-33c - 24h
Whisky Parts Co. No.9 GVL
$450.00
The No.9 Carbon GVL rim’s low rotational weight and the aerodynamic benefits of its 35mm-deep rim profile help you conserve energy over miles of rollers, false flats, and whatever else your gravel rides throw at you. The 23mm internal width pairs well with tires ranging from 32mm to 2.2-inches wide for versatility in unpredictable conditions. The asymmetric rim profile equalizes spoke tension and angles for stronger, stiffer builds, making the No.9 Carbon GVL a solid foundation for wheels that will take your gravel bike to the next level. - Recommended rider weight limit is 240 lbs. - 85 PSI maximum tire pressure on a 32c tire - Weight: 435g - For tires 32mm – 2.2-inches
Page 1 of 16 Next page