Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$6.99
- Flanged 15mm axle nuts
- Durable chromoly construction
- Spacing / Axle: B/O
$7.00
Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.
$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm.
Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
$7.79
Rubber rim strips for 24-inch diameter fatbike rims.
- Sold individually
$7.99
- Replacement Presta valves cores
- Fits tubes with removable Presta cores and tubeless valves
- Sold in pairs
$7.99 - $8.99
You need rim tape to keep your tubes from blowing through the spoke holes, especially when landing big airs. WeThePeople's got your back, though. If your's is questionable, you better replace it with this WTP Nylon Rim Tape, a perfect fit with Logic Rims.
- Strong
- Lightweight
- Tube-proof
$8.00 - $49.39
Ease of use, lightweight, and optimum performance in a single product.
The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
$8.00
Replacement freehub spoke protector, in various sizes for different freehub sizes.
- Made of clear plastic
- 3 hooks for affixing to spokes
$8.00
Replacement freewheel spoke protector, in various sizes for different freehub sizes.
- Made of clear plastic
- Fits around standard freewheel threads
$8.00
A non-tubeless protective strip to cover the spoke holes in your ENVE carbon clinchers.
$8.00 - $9.79
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$8.10
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$8.95
Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types.
- Easily snaps over your rims
- Stretchy, tightly woven material provides a close fit and protects from abrasion
- Sold as a pair
- Not for tubeless set up
$8.99
Origin-8's Track Cog Lock Ring with left-handed threading and 1.29 x 24tpi in a chrome finish completes your basic track cog locking needs.
$8.99
- Fits all freewheel hubs
- Will not fit Cassette hubs
- Type: STD Plastic
- Color: Clear
$8.99
Replacement indicator chain for three speed Sturmey Archer hubs.
$8.99
This lightweight, high-pressure rim tape offers great protection against spoke hole flats and is easy to install. This Italian-made tape is light and thin, so it will not inhibit tire fitting. Nylon elastic material is used to ensure a snug fit without movement.
$9.00
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
$9.95
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
$9.95
The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it.
- Made in Minnesota to aerospace standards
$9.99 - $23.99
Replacement axles for MX-2000 hubs.
Size: 14 x 100 x 165mm
- Supplier Part: KT-M18F
- MPN: 370666
- Front/Rear: Front
- Diameter: 14mm
- OLD: 100mm
Size: 14 x 110 x 180mm
- Supplier Part: KT-389R
- MPN: 370668
- Front/Rear: Rear
- Diameter: 14mm
- OLD: 110mm
Size: 3/8-inch x 100 x 165mm
- Supplier Part: KT-M17F
- MPN: 370667
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 180mm
- Supplier Part: KT-M88R
- MPN: 370682
- Front/Rear: Rear
- Diameter: 14mm slotted for 3/8-inch
- OLD: 110mm
$9.99 - $13.49
WTP's Helix hub guards are designed to work on The Helixline of hubs, replacing the cones for a perfect fit without having to spread your dropouts.
- Includes heat-treated chromoly adaptor to replace hub cone nuts for a perfect fit
- Rear Hub guards are compatible with Helix V1 and Helix V2 freecoaster hubs and many other "KHE" style freecoasters on the market
$10.00 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable