Filter By:
29-Inch
$1,224.00 - $1,672.00
The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.
$552.00 - $750.00
Responding to the demand from top racers for even wider rims, DT have developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.
$539.00 - $750.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
$565.00 - $776.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires it will eat up the roughest of descents you can throw at it, and it will climb to those trailheads with ease. Really the perfect size for demanding all mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
$462.90
If cross country means high speed after work rides and the occasional endurance race to you, then have a closer look at the XR 1700 SPLINE wheel. The lightweight and welded aluminum rim, laced with competition spokes and reliable 350 hub, create a snappy accelerating wheel.
- Welded Aluminum rim with 25mm internal width
- 350 hub with 36 point SL Ratchet system
- Competition spokes and Squorx nipples
- Designed for Cross Country applications
$352.90 - $379.90
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel.
- Intended use = All-Mountain/Trail, Enduro and Freeride
- Tubeless ready, 30mm wide and light rim
- Straight-pull hubs/spokes built with a 3-cross pattern
- Includes Tubeless Valve and Tape
$1,222.90 - $1,259.90
Envision riding the fastest line, a rocky ridge or over a nasty field of roots without fear. The EXC 1200 Classic supports your most daring line choices, with still plenty of reserve if they don’t go to plan. Our unique process provides maximum carbon compression to push durability further than ever before. A patent-pending technique for layer-by-layer quality control ensures minimized imperfections straight out of the mold, to maximize your commitment. A lighter front rim has 28 DT revolite spokes, while the more durable rear rim has 32. The high- engaging Ratchet DEG makes for a smaller idle distance, crucial for acceleration out of corners. Get ready to push on the stages and break your limits.
- Carbon, Hookless tubeless TSS rim with 30mm inner width
- DT Swiss Revolite spokes and 180 classic hub
$975.90
The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel.
- Designed for All Mountain applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples
$352.90 - $380.00
Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.
$975.90
Tailored to the needs of performance orientated cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. Lightweight 30 mm wide carbon rims offer ideal support for modern XC tires. Rolling on race proven and super durable 240 hubs and Competition Race spokes, allowing every bit of energy to be transferred into forward motion.
- Designed for Cross Country applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples
$256.00
Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.
$719.90
The FR 1500 wheels are ready to transform that nervous anticipation before opening a new line into relief, providing increased riding precision and wheelset durability. A unique, lightweight and stable rim profile not only increases impact resistance, but also reduces weight and the probability of pinch flats. The wheel's design takes load distribution in extreme riding situations into account to create the strongest and lightest possible wheel; offering precision and durability. The FR 1500 wheels won't hold you back from finding new lines.
- The strongest Downhill and Freeride wheels in the DT Swiss range
- FR 541 alloy rims provide increased impact and pinch flat resistance for added reliability when you need it
- 240 hubs for uncompromising resistance, built with J-bend Competition spokes
- 36t Ratchet EXP driver for reliable engagement
- Wheels are pre-taped valves included
- Includes XD and Microspline freehubs
$430.00
The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance, built on reliable and smooth rolling 350 hubs.
- Welded Aluminum rim with 30mm internal width
- 350 hub with 36 point SL Ratchet system
- Competition spokes and Squorx nipples
- Designed for All Mountain applications
$277.90
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel.
- Intended use = All-Mountain/Trail, Enduro and Freeride
- Tubeless ready, 30mm wide and light rim
- Straight-pull hubs/spokes built with a 3-cross pattern
- Includes Tubeless Valve and Tape, 6-bolt adapter with lockring
$611.00 - $809.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
$565.00 - $776.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
$506.00
On an eMTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
- 350 based Spline hub with 24 tooth ratchet system and steel freehub body
- E-bike specific straight pull spokes are built with a 3-cross pattern
- Includes SRAM XD driver/end cap, tubeless tape and tubeless valve
$380.00
Versatility. A mountain bike is meant to go up and down mountains and to provide fun while doing so. The H1700 Spline do precisely that. And since e-bikes allow the rider to go up and down many mountains in one ride, reliability and weight is key.
- 350 based Spline hub
- E-bike specific straight pull spokes are built with a 3-cross pattern
- Includes tubeless tape and tubeless valve
$399.90
When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems’ durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths.
- Aluminum rim, Hooked / Crotchet tubeless ready
- DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel
- 370 Hub with Ratchet LN 18pt
- Includes Tubeless Valve and Tape, 6-bolt adapter with lockring
$379.00
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
$1,088.90
The XMC 1501 Spline One is an ideal all-rounder wheel featuring a 240 hub combined with a carbon rim that results in a durable and versatile package. The low weight of the carbon rim allows you to save energy when climbing so that you can attack long descents on varied surfaces where grip is paramount. The 240 hub has proven its reliability time and time again with its lightweight and reliable freehub system to transmit power for a long time. Double-butted DT competition race straightpull spokes and top quality wheel construction round out the XMC 1501 Spline One wheel.
- Designed for epic adventures and all-around applications
- Carbon, hookless tubeless rim with 30mm internal width
- 240 hub
- Competition race spokes
- Ratchet DEG freehub system with 90 points of engagemen
$361.00 - $532.00
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
$348.00 - $519.00
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
$526.00 - $737.00
The new 22.5mm-wide Cross Country specific XR 1501 SPLINE ONE comes with all the advancements of a modern cross country rim, only at 2.5mm more width, providing more air volume for the same size tire which creates more traction and comfort. The asymmetric rim further improves spoke angles, making the wheel even stiffer, more precise handling, and more responsive. The specially developed process for surface hardening and the gentle anodizing result in an unsurpassed surface durability at no additional weight.
$1,688.90 - $1,739.90
Envision riding the fastest line, a rocky ridge or over a nasty field of roots without fear. The EXC 1200 Classic supports your most daring line choices, with still plenty of reserve if they don’t go to plan. Our unique process provides maximum carbon compression to push durability further than ever before. A patent-pending technique for layer-by-layer quality control ensures minimized imperfections straight out of the mold, to maximize your commitment. A lighter front rim has 28 DT revolite spokes, while the more durable rear rim has 32. The high- engaging Ratchet DEG makes for a smaller idle distance, crucial for acceleration out of corners. Get ready to push on the stages and break your limits.
- Carbon, Hookless tubeless TSS rim with 30mm inner width
- DT Swiss Revolite spokes and 180 classic hub
- Ratchet DEG with 90 tooth ratchets
$426.90
F 1900 Classic wheels are made to withstand some of the harshest conditions. With a new rim based on the latest generation of Downhill rim design, coupled with the tried-and-true ratchet hub, the F 1900 wheel aims to take the beating of numerous bike park laps.
- Intended use = DH/All-Mountain/Trail
- Tubeless ready, 30mm wide alloy rim
- Sealed bearing, Spline Hub with Ratchet LN 18T freehub drive system
- Includes tubeless valve and tape
$289.90
F 1900 Classic wheels are made to withstand some of the harshest conditions. With a new rim based on the latest generation of Downhill rim design, coupled with the tried-and-true ratchet hub, the F 1900 wheel aims to take the beating of numerous bike park laps.
- Intended use = DH/All-Mountain/Trail
- Tubeless ready, 30mm wide alloy rim
- Sealed bearing, Spline Hub
- Includes tubeless valve and tape
$975.90
EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes.
- Designed for Enduro applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples
$1,222.90
If you're looking to get away from the hustle and bustle and explore unknown territory, the HXC 1200 Spline is the ideal choice for you. The lightweight carbon fiber wheelset for electric mountain bikes will take you to new heights, while the sturdy and durable rims will help you conquer steep alpine rocks. Through a new process, maximum carbon fiber can be achieved, and the patent-pending laminated quality control technology ensures that the rims are flawless when they come out of the mold, allowing you to ride your electric mountain bike without any worries. Trapped in the middle of nowhere. Equipped with the Ratchet EXP OS ratchet system and 28 DT complite HY spokes specially designed for electric vehicles, just turn on the power, step on the pedal, and you can start freely.
- Carbon, Hookless tubeless TSS rim with 30mm inner width
- DT Swiss Complite Hybrid T-head spokes and 180 hub
$1,193.90
Made for modern XC tracks—240 hub + 30 mm carbon rim = super-fast!
Tailored to the needs of performance-oriented cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. The light, 30mm-wide carbon rims offer ideal support for modern XC tires. Rolling on race-proven and super-durable 240 hubs with RATCHET EXP freehub system, every bit of your energy is transferred into forward motion via equally racy double-butted spokes and a perfect wheel build.
Page 1 of 2
Next page