Filter By:

  • Show More Brands

  • Show Fewer Brands

650B

Stan's NoTubes Sentry MK3 27.5-inch Rear
$380.00
Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction delivers width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 wheels are a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails. Stan's updated Neo hub includes a stronger axle and reliable Durasync six pawl freehubs. The Sentry MK3 proves wider can mean faster. Sentry MK3 wheels include pre-installed tape for tubeless use and presta valve. - Patented BST design for the easiest and most reliable tubeless - 32mm internal width for stability with wider tires - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.50"-3.00" Trail tires
DT Swiss M 1700 Spline 35
$387.00 - $546.00
For riders looking for more — more grip, more capability — the M 1700 SPLINE 35 is the right choice. Wearing some plus size tires, this wheelset will carry you far into all mountain terrain. Offering an almost unbeatable ratio of affordability, high-end components, and build, it is the workingman's wheel. Its simple and durable straight-pull construction with DT's high precision Ratchet System hubs make it so reliable and easy to use, that all that's left for you is to focus on the ride and think about the next adventure.
DT Swiss H 1700 Spline 30
$394.00 - $526.00
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
Stan's NoTubes Hugo 52 27.5 Rear Wheels
$395.00
Hugo’s ultra-low profile sidewalls combine with a special central raised box section to create a structurally superior fat rim that’s exceptionally light, fast-rolling, and nearly impervious to flats, even when using tubes. The shape of the rim creates a superior seal — making tire inflation easy without a tube — and spreads the tire's contact patch for better strength and support with excellent pinch flat protection. Hugo wheels include: pre-installed tape for tubeless use and schrader valve system; 12x142mm rear wheels also include quick-release end caps and quick release. - For fat bike riding, racing and adventuring - Genuine NoTubes' tubeless technology with innovative raised center rim profile for tubeless use - Rim width: 53.1mm external and 49.9mm internal for maximum tire volume and flotation - Compatible with plus and fat clincher tires when used with 27mm Yellow Tape, 35mm Valve Stem, and NoTubes Sealant
Stan's NoTubes Hugo 52 27.5-inch Rear
$395.00
While their origins can be found in bikes built to tackle such legendary events as the Iditarod Trail Invitational and the Arrowhead 135, today's fat bikes have evolved into much more than sluggish snow crawlers. With the release of the first NoTubes rims designed specifically for this emerging category, there are now rims designed to push the boundaries of what a fat bike can do. While Stan's Hugo 52 for Plus Bikes are the first fat rims to feature Stan's Bead Socket Technology, the innovations don't stop there. Hugo's ultra-low profile sidewalls combine with Stan's special central raised box section to create a structurally superior fat rim that's exceptionally light, fast-rolling, and nearly impervious to flats even when using tubes. Of course, BST means the best tubeless technology available, and the special shape of the Hugo series rims creates a superior seal, inflating easily without a tube. Stan's interior rim shape also spreads out the overall contact area for better strength and support and excellent pinch flat protection. Fat bike rims with taller sidewalls and recessed center cavities can't touch Hugo's added stability and tubeless performance, and those who choose to use a tube will find Stan's profile makes pinch flats virtually impossible. The next generation of fat bike rims has finally arrived. Hugo wheels include pre-installed tape for tubeless use and Schrader valve system; 12x142mm rear wheels also include quick-release end caps and quick release. - For fat bike riding, racing, and adventuring - First fat bike rim to feature genuine NoTubes' tubeless technology with innovative raised center rim profile for tubeless use - Rim width: 53.1mm external and 49.9mm internal for maximum tire volume and flotation - Compatible with plus+ and fat clincher tires when used with 27mm Yellow Tape, 35mm Valve Stem, and NoTubes Sealant
FSA NS 27.5-inch Tubeless Ready Wheelset
$424.99
FSA's NS Wheelset is a tremendous value in an alloy MTB, cyclocross, and gravel bike wheelset with renowned FSA reliability and high-performance technology. Suitable for use on a wide range of price point bikes. - Asymmetric, 25mm deep x 26.1mm wide alloy rim - Tubeless compatible - 148 - 15 x 110mm TA front hub and 12 x 148mm TA - Cartridge bearings (2F+4R) - 2-cross double butted spokes with brass nipples - Artisan built, entirely by hand - Includes tubeless valves (1 pair) and spoke protector - Compatible with cyclocross and gravel bikes
Giant P-TRX0 27.5-inch Carbon Wheel
$433.00 $1,155.00 63% Off
Whether you're staring down an enduro race day or in the midst of an epic ride with your buddies, Giant's P-TRX0 carbon trail wheels are here to crush it all. 27mm-wide carbon rims are light, tough, and give your tires a wide, ground-hugging stance. They're tubeless compatible, so you can charge hard with enhanced traction and increased flat resistance. Aluminum hub shells are equipped with renowned DT Swiss internals for smooth spinning and DT Swiss Aerolite bladed spokes and ProLock nipples tie them together.
Stan's NoTubes Baron S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)
Stan's NoTubes Major S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Major S1 Wheelset - Use: Plus Tire Adventure and Trail - Internal Rim Width: 38mm - Optimal Tire Size: 3.0 to 3.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (2,030g), 27.5-inch (2,094g), and 29-inch (2,198g).
Stan's NoTubes Sentry S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Sentry S1 Wheelset - Use: Plus Tire Performance and Adventure - Internal Rim Width: 32mm - Optimal Tire Size: 2.5 to 3.0-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,972g), 27.5-inch (2,034g), and 29-inch (2,134g)
Giant XCR 0 27.5 Carbon XC - Boost Front Wheel
$496.00 $992.00 50% Off
From pro-level race bikes to sport, fitness and adventure bikes, Giant delivers the benefits of tubeless tire technology to riders of all types. Features - Ultra-light full composite 27.5” rims - Tubeless compatible using supplied rim strips and valves - 21mm inner rim width for better tire performance - DT Aerolite/Aero Comp bladed stainless steel spokes; 28H front/rear - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Alloy locking nipples - Giant Alloy hub shell, 6-bolt disc compatible, DT internals - Boost 148mm rear/ 110mm front - 36T star ratchet with 10° engagement - Compatible with SRAM XX1 drivetrain using optional XD driver bodies - 1420g per pair
Race Face Turbine 27.5-inch Rear Wheel
$499.99
Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride. R is for rally. HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
DT Swiss XR 1501 Spline ONE 22.5
$526.00 - $737.00
The new 22.5mm-wide Cross Country specific XR 1501 SPLINE ONE comes with all the advancements of a modern cross country rim, only at 2.5mm more width, providing more air volume for the same size tire which creates more traction and comfort. The asymmetric rim further improves spoke angles, making the wheel even stiffer, more precise handling, and more responsive. The specially developed process for surface hardening and the gentle anodizing result in an unsurpassed surface durability at no additional weight.
DT Swiss EX 1501 Spline ONE 25
$539.00 - $750.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
DT Swiss XR 1501 Spline ONE 25
$552.00 - $750.00
Responding to the demand from top racers for even wider rims, DT have developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.
DT Swiss EX 1501 Spline ONE 30
$565.00 - $776.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
DT Swiss XM 1501 Spline ONE 30
$565.00 - $776.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires it will eat up the roughest of descents you can throw at it, and it will climb to those trailheads with ease. Really the perfect size for demanding all mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
Giant P-TRX0 27.5-inch Carbon Rear Wheel
$578.00 $1,155.00 50% Off
Whether you're staring down an enduro race day or in the midst of an epic ride with your buddies, Giant's P-TRX0 carbon trail wheels are here to crush it all. 27mm-wide carbon rims are light, tough, and give your tires a wide, ground-hugging stance. They're tubeless compatible, so you can charge hard with enhanced traction and increased flat resistance. Aluminum hub shells are equipped with renowned DT Swiss internals for smooth spinning and ultra fast engagement. DT Swiss Aerolite bladed spokes and ProLock nipples tie them together. This wheel is SRAM XX1 compatible with an optional XD driver (sold separately).
Giant P-XCR0 27.5-inch Composite Rear Wheel
$578.00 $1,155.00 50% Off
Turn your XC bike into an XC rocket with Giant's light, stiff P-XCR0 27.5-inch Composite wheels. The go-fast magic comes from the wheel's 25mm-wide carbon, tubeless-ready rim — it's more than ready to slay your favorite trails. Giant supplies the aluminum hub shells, and DT Swiss provides their renowned star rachet internals, as well as their Aerolite bladed stainless steel spokes, and aluminum nipples for unparalleled ride quality, strength, and speed.
DT Swiss XM 1501 Spline ONE 35
$605.00 - $802.00
Fat bikes have opened the eyes to many riders regarding where and how bicycles can be ridden. The XM 1501 SPLINE 35 carries the genes of fat in a lightweight trail package. It is the perfect fit for 2.6-inch tires. Fit to a modern trail bike, it opens up unknown possibilities: That slippery off-camber root section all of a sudden is looking a lot less intimidating. With our industry leading material and manufacturing know-how DT made sure that this wheel, despite it's built-in rowdiness, comes to you in a lightweight and durable package, ready for many all-mountain adventures.
DT Swiss HX 1501 Spline ONE 30
$611.00 - $809.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
DT Swiss XM 1501 Spline ONE 40
$631.00 - $829.00
Firmly standing in the plus category, the XM 1501 SPLINE ONE 40 enables these bikes to show their full potential when matched to the right plus size tire. Set up tubeless, such a bike has most of the possibilities of a fat bike while being light enough to be ridden very, very dynamically. DT's rim profiles, wheel build, and hub technology are so elaborate, they will easily stand up to all the abuse such a plus bike is capable of.
DT Swiss HX 1501 Spline ONE 35
$638.00
Plus size tires are a dilemma: All of a sudden you find yourself riding sections where you previously dismounted, and you're doing so at a good pace. That's a lot of fun. On the other side it makes it pretty tough on your bike and especially the wheels. With the HX 1501 SPLINE ONE 35 DT have succeeded to deliver alloy wheels able to bridge the gap. Created with all of DT Swiss' know how and passion, it is light and reliable but loves to smash into the rough like no other.
Spank Oozy Trail 345 Wheelset
$649.00
Up your width, up your traction, up your stoke! SPANK Industries’ OOZY Trail 345 Wheelset is hand built and trued to industry leading standards. 32H straight-pull OOZY Trail Hubs offer increased engagement and adaptability, and utilize unique over-sized SSL (single spoke length) flanges to improve contact and support between spokes, delivering enhanced stiffness, durability, and spoke torque retention. Laced with Spank’s 30mm internal width OOZY Trail 345 Rims, the OOZY Trail 345 Wheelset combines the strength and rigidity of SPANK’s patented Oohbah reverse-well rim profile with the unparalleled tubeless performance of Bead Bite anti-burp rim hooks. The result is a wide-set, bombproof wheelset that’s both lightweight and comfortable on any terrain. - Key technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Freehub: alloy - Shimano (XD available) - Adapters Included (mm): FRONT: 20x110 REAR: QRx135 - Adapters Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 - Tubeless: Tubeless equipped (tape & valves included) - Discipline: trail
Spank Spank 350 27.5-inch Wheelset
$649.00
- Weight optimized wheelset ideal for Trail/AM/Enduro bikes looking for a wide profile - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles
Stan's NoTubes Arch CB7 27.5-inch Front
$679.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape offers easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
Spank 350 Vibrocore 27.5-inch Wheelset
$699.00
- High performance Wheelset with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
Stan's NoTubes Arch CB7 27.5-inch Rear
$720.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke, and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring a Durasync 6-pawl freehub with fast 10-degree engagement. The 100% CNC-machined hub shell and smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs with 6-pawl simultaneous engagement - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape offers easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
Race Face Next R 27.5-inch Front Wheel
$724.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Whisky Parts Co. No.9 30w Front 27.5-inch
$725.00
Whisky No.9 30w carbon tubeless wheels are the most versatile performance wheels offered by Whisky. The No.9 30w rims have a 24mm internal width that supports a variety of tires from road plus to standard mountain sizes and feature hookless walls for easy tubeless setup and impact resistance. The No.9 30w wheels are light and wide, providing great versatility no matter where your ride takes you. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight, and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape