650B

Are you already planning your next bikepacking trip? The GR 1600 wheels are made for gravel adventures and all those unique experiences one can find far away from the tarmac and the rest of the road cycling community. A super durable aluminum wheel made of reliable components that supports you for endless miles of troublefree riding pleasure. Ready to explore the world? With the GR 1600 you definitely are. - 350 based Spline hub

On an eMTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again. - 350 based Spline hub with 24 tooth ratchet system and steel freehub body - E-bike specific straight pull spokes are built with a 3-cross pattern - Includes SRAM XD driver/end cap, tubeless tape and tubeless valve

Fulcrum hits the dirt with new Rapid Red 5 disc brake gravel wheels. - 2 Way Fit Ready - Tubeless Ready - 2:1 Spoke Ratio for improved torque balacing - Asymetric rim for improve performances and handling - Straight pull spokes for performance and durability consistency - Included DRP protection for longer bearing lifespan - Factory installed tubeless tape - 13-Speed N3W Driver

The FR 1500 wheels are ready to transform that nervous anticipation before opening a new line into relief, providing increased riding precision and wheelset durability. A unique, lightweight and stable rim profile not only increases impact resistance, but also reduces weight and the probability of pinch flats. The wheel's design takes load distribution in extreme riding situations into account to create the strongest and lightest possible wheel; offering precision and durability. The FR 1500 wheels won't hold you back from finding new lines. - The strongest Downhill and Freeride wheels in the DT Swiss range - FR 541 alloy rims provide increased impact and pinch flat resistance for added reliability when you need it - 240 hubs for uncompromising resistance, built with J-bend Competition spokes - Wheels are pre-taped valves included

The new 22.5mm-wide Cross Country specific XR 1501 SPLINE ONE comes with all the advancements of a modern cross country rim, only at 2.5mm more width, providing more air volume for the same size tire which creates more traction and comfort. The asymmetric rim further improves spoke angles, making the wheel even stiffer, more precise handling, and more responsive. The specially developed process for surface hardening and the gentle anodizing result in an unsurpassed surface durability at no additional weight.

The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.

Responding to the demand from top racers for even wider rims, DT have developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.

With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.

The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires it will eat up the roughest of descents you can throw at it, and it will climb to those trailheads with ease. Really the perfect size for demanding all mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.

Fat bikes have opened the eyes to many riders regarding where and how bicycles can be ridden. The XM 1501 SPLINE 35 carries the genes of fat in a lightweight trail package. It is the perfect fit for 2.6-inch tires. Fit to a modern trail bike, it opens up unknown possibilities: That slippery off-camber root section all of a sudden is looking a lot less intimidating. With our industry leading material and manufacturing know-how DT made sure that this wheel, despite it's built-in rowdiness, comes to you in a lightweight and durable package, ready for many all-mountain adventures.

When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.

The aluminum Enduro wheelset made for the roughest Enduro tracks around the world. We have taken all our aluminum wheel know-how and put it into this high-performing package. EX 1700 SPLINE wheels are based on our famous 36T RATCHET hubs combined with a super-strong and welded 30mm-wide aluminum rim. The rim profile is designed to withstand the hardest use of Enduro racing while still keeping the weight low for long and demanding uphills. Laced to double-butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating.

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance. Built on reliable 350 hubs with 36-tooth ratchet engagement. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

The AG28 Foundation wheel combines a small diameter rim with high-volume tires — the perfect platform for good times. Preparation is key to a successful adventure into uncharted territories. Enve's experiences developing and riding the flagship G Series and M Series have created a quiver a performance enhancing features that have been incorporated into the AG28. The AG28 is designed to be your uncompromising companion when you unwittingly bite off more than you can chew. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 21mm depth and 28mm internal rim width, designed to support 45 - 57mm tires. Optimized for tubeless, Tube compatible

Firmly standing in the plus category, the XM 1501 SPLINE ONE 40 enables these bikes to show their full potential when matched to the right plus size tire. Set up tubeless, such a bike has most of the possibilities of a fat bike while being light enough to be ridden very, very dynamically. DT's rim profiles, wheel build, and hub technology are so elaborate, they will easily stand up to all the abuse such a plus bike is capable of.

Plus size tires are a dilemma: All of a sudden you find yourself riding sections where you previously dismounted, and you're doing so at a good pace. That's a lot of fun. On the other side it makes it pretty tough on your bike and especially the wheels. With the HX 1501 SPLINE ONE 35 DT have succeeded to deliver alloy wheels able to bridge the gap. Created with all of DT Swiss' know how and passion, it is light and reliable but loves to smash into the rough like no other.

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

The Arch MK4 is the wheelset a lot of us here at Stan's choose to ride. All-mountain, Downcountry, Trailduro—whatever they're calling it this week, when you like pushing your limits on climbs, descents, and every kind of trail, this is your wheelset. The Arch MK4's 28mm internal width and patented lightweight, low-profile design is not afraid to climb, while being an absolute monster on the descents. With a welded seam, reinforced spoke bed, and durable 6069 aluminum construction, the Arch MK4 rims give you the confidence to ride everything. When it comes to a consistent and reliable airtight tubeless seal, nothing beats Stan's patented Bead Socket Technology. The Arch MK4 rims feature an asymmetric design with offset spoke holes to improve spoke angle and create a stronger all-around wheel. Unlike most asymmetric rims that suffer from difficult inflation and poor tubeless performance, Stan's BST-Asymmetric design delivers all the advantages of a stronger wheel, with no compromises in tubeless performance. Nobody likes downtime, so the Arch MK4 wheelset is built with traditional J-bend spokes based on their proven strength, ride quality, and easy serviceability. Stan's has always made it easy to find replacement spokes should you ever damage your wheel, and now we've made it even easier. MK4 front and rear wheels of the same diameter all use the exact same very common spoke length, both sides, front and rear. Serviceability doesn't get any easier than that. From the first click of the incredible M-pulse hubs, it's clear that confidence is the philosophy behind every part of this wheelset. Designed and CNC machined by Project321 in Bend, Oregon, M-pulse freehubs feature 6 pawls with Neodymium magnets that lock into place with greater force than conventional pawl springs, but offer virtually no resistance when coasting. Multiple teeth on each pawl offer better load distribution for years of trouble-free riding, and the angle of the pawls was engineered to transfer stress away from the rotating bearings, decreasing stress and wear on the entire freehub. That durability extends to the 17mm axles machined of 7075 aluminum and the full complement of Enduro brand bearings, including a double-row freehub bearing. M-pulse internals are also fully shielded inside the hub, because the only thing better than a good bearing seal is a good bearing seal most dirt can't even reach. As durable as they are, these hubs are also built for speed. M-pulse hubs engage with only 1.66°of rotation, putting down power nearly instantaneously, but how smooth these hubs roll is what really stands out. Adjustable preload allows you to fine tune M-pulse hubs for reduced friction, and less drag means more speed on the ground.The result is a bombproof hub with quick, consistent engagement and less resistance for more speed. Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations. Tubeless ready with rim tape installed. The Arch MK4 is our most versatile wheelset, and the best aluminum wheelset available for riders who want to push limits on every trail. Up, down, and wherever the ride takes you, the Arch MK4 wheelset has it under control. - Arch MK4 wheels include pre-installed tape for tubeless use and presta valves. - Versatile 28mm internal rim width optimized for 2.2-2.5” tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed - BST-Asymmetric design combines Stan’s legendary easy tubeless inflation with a stronger, more balanced wheel build - M-pulse ultra-low drag magnetic pawl adjustable hubs with 1.66° engagement - Enduro bearings with double-row freehub bearing - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - Connection program includes 5-year hub warranty, 3-year rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

WCS Zeta GX 650B TA12 Wheelset

Your wheels are arguably the most important component on your mountain bike, which is why Reserve developed an all-new aluminum line of trail wheels. Reserve aluminum wheels have been designed and developed to provide a product that rivals the performance of the much-loved carbon wheels, but at a much more accessible price point. And with an industry-leading lifetime guarantee, you can feel confident you will be enjoying these wheels for years to come. 30 SL AL wheels are designed for going fast on your favorite trails. - Aluminum wheels are designed to withstand any abuse you can throw at them, supported by a Reserve lifetime guarantee - Asymmetrical rims build stiffer, stronger and more reliable wheels by improving the bracing angles and equalizing the spoke tensions between the drive and non-drive side spokes - Disc brake only, tubeless ready design with tape included - Includes the patented Fillmore valves with a high-flow design that eases tubeless set up and eliminates the traditional, delicate, clog-inciting valve core of yesteryear - 30 SL Al rims feature a 30mm width and 20mm depth profile that's designed for XC, Trail and All Mountain riding - Recommended for tires 2.2 - 2.5" wide - Built with DT Swiss Hubs featuring DEG 90 points of engagement

The FR 1500 wheels are ready to transform that nervous anticipation before opening a new line into relief, providing increased riding precision and wheelset durability. A unique, lightweight and stable rim profile not only increases impact resistance, but also reduces weight and the probability of pinch flats. The wheel's design takes load distribution in extreme riding situations into account to create the strongest and lightest possible wheel; offering precision and durability. The FR 1500 wheels won't hold you back from finding new lines. - The strongest Downhill and Freeride wheels in the DT Swiss range - FR 541 alloy rims provide increased impact and pinch flat resistance for added reliability when you need it - 240 hubs for uncompromising resistance, built with J-bend Competition spokes - 36t Ratchet EXP driver for reliable engagement - Wheels are pre-taped valves included - Includes XD and Microspline freehubs

The AG28 Foundation wheel combines a small diameter rim with high-volume tires — the perfect platform for good times. Preparation is key to a successful adventure into uncharted territories. Enve's experiences developing and riding the flagship G Series and M Series have created a quiver a performance enhancing features that have been incorporated into the AG28. The AG28 is designed to be your uncompromising companion when you unwittingly bite off more than you can chew. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 21mm depth and 28mm internal rim width, designed to support 45 - 57mm tires. Optimized for tubeless, Tube compatible

Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos

The Classic Enduro S is designed for demanding trails to all mountain adventures, providing lightning-fast propulsion courtesy of the Hydra Classic hubs laced to the terrain-taming Enduro S alloy rim. The combination of materials creates a wheelset that's ready for charging those technical trails, making these the perfect upgrade for any mountain bike built to attack demanding terrain with long descents. - Enduro S Alloy rims with 30.5mm inner width and 28 spokes - 6-Pawl Hydra Freehub Body features 690 engagement points at every .52 degrees, yeilding telepathic control - Traditional and conventional flanged hubshell packed with i9 tech, while using a standard j-bend spoke and nipple - Accommodates tire widths 2.3-2.8"

Zipp's 3ZERO MOTO carbon enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Zipp's single-wall approach, Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed - Single-wall design called Moto Technology - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners, smoother ride in rocky terrain - Ability to run lower tire pressure - Rim is designed for compliance, creating the feel of extra suspension - ZM2 Hub - E-MTB approved - TyreWiz tire-pressure monitoring device sold separately

EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel. - Designed for All Mountain applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

The GRC 1400 DICUT wheels are ready for the vibrations and obstacles of a gravel tour, so you can leave not just the road, but your shadow and inhibitions behind as well. With two distinctive rim heights available, riders can harness the reliability to smoothly ride over crisp champagne-like gravel segments with speed, or confidently tackle the on-the-rocks unpredictability of unbeaten trails. 50mm height rims are ideal for aerodynamic optimization, while the 30mm high rim provides the agility needed on long adventures, unhooking you from any limitations. - Built using a state-of-the-art carbon manufacturing process, resulting in lightweight carbon rims straight out of the mold, without the need for a finishing coat - Ideal performance to weight ratio using the 240 DICUT hub and DT Aerocomp spokes - Intended use = Gravel/Off-road - Includes tubeless valve, tape and wheel bag - Tubeless ready, 24mm wide carbon rim with 30mm high profile rim