Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Brakes/Levers/Pads
We hold a wide selection of caliper mounts to fit perfectly with our brake systems Most of our mounts are available in a choice of black or silver Brake mounts are machined from T6 2014 alloy We have designed the brackets only for the purpose stated All mounts are supplied with bolts for mounting to frame/fork
KEY FEATURES
- We hold a wide selection of caliper mounts to fit perfectly with our brake systems
- Most of our mounts are available in a choice of black or silver
- Brake mounts are machined from T6 2014 alloy
- We have designed the brackets only for the purpose stated
- All mounts are supplied with bolts for mounting to frame/fork
Designed specifically for our V4 brakes. The Vented Rotor is highest performing disc for the harshest operating conditions. The outer is constructed from three pieces to create a gap between the external braking surfaces to help reduce heat build up.
KEY FEATURES
- The vented rotor is designed specifically for our V4 brakes.
- Highest performing disc, for the harshest operating conditions.
- Outer is constructed from three pieces to create a gap between the external braking surfaces.
- The rotor uses internal fins to allow the air to flow between the two friction parts,
the induced air flow significantly reduces heat build up in the rotor.
- Fantastic and consistent braking performance in wet conditions thanks to its capability to clear the water layer through its fins.
- Dyno tests show up to 15% less heat build upcompared to our floating rotors.
- Vented outer is joined to aluminium centre allowing 1 of freedom in a true floating design.
- Available in: Ø203 and Ø220mm sizes in a 6 Bolt fitment.
- 3.3mm Thick
- Weight 203mm: 288g
- Pair of G-Type disc brake pads without fins, for 1 caliper
- Resin or Metallic brake compound
- Available with Steel backplate for lower cost or Aluminum backplate for superior heat management
- Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes
- Interchangeable with F-Type and J-Type pads
- Includes spring and pin
- Pair of J-Type disc brake pads with fins, for 1 caliper
- Available with resin or metallic compound
- Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes
- Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches
- Longer lasting than G-type pads
- Interchangeable with F-Type and G-Type pads
- Includes spring and pin
- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents
- Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions
- Longer lasting than K-Type pads
- Interchangeable with K-type finless pads
- Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400
- NOT compatible with XTR BR-M9100
- Shimano, BR-M515, M05, Resin disc brake pads, pair, B type, Y8B698010
- Can be used to replace E-Type pads on older calipers
$1.05 - $2.88
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
$2.15
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$3.00
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$3.99
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
$3.99
• Compatible with most side pull and center pull brakes
• All weather compound
$4.00
Disc Brake Adapters
$4.00
Hose fittings for Hayes hydraulic disc brakes available a la carte.
Hayes brake compatibility:
- HFX-9
- Prime
- Sole
- El Camino
- Radar
$4.99
Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications.
- Stainless steel
- 6mm I.D.
- 10 per bag
$4.99
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes
- Model: Front
$4.99
Can be used to provide extra clearance between brake caliper and spokes.
Spacer should be placed between rotor and hub.
$5.00
Brass hose insert for Hope hydraulic disc brakes.
$5.00
Our mountain rim brake pads are available both with a threaded or smooth post.
$5.99
Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable.
- Lightweight resin/alloy design
$6.50
-Single compound cartridge road brake pad inserts
$6.95 - $10.00
Replacement inserts for Shimano cartridge v-brake pads
- Black: standard compound designed for dry condition riding
- Red: semi-aggressive compound for good performance
- Salmon: aggressive compound for extreme weather conditions
- Green: designed for ceramic coated rims
- Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$6.99 - $14.00
Kool-Stop's New V-Type 2 insert just got heavier with 1.5mm more pad material than the original V-Type insert. Still fits most Shimano Style V-Brake holders
Features:
- Water Grooves
- Dual Compound
- Rim Friendly
Compounds:
- Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop!
- Salmon: Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.
- Triple: Kool-Stop's triple compound is their most aggressive compound combination for superb braking and controlled stopping in all weather conditions.
- Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions.
- Carbon 2: This compound works great on most carbon wheels and is designed to withstand those fast steep descents without a lot of pad wear.
- Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding.
$6.99
- 70mm universal brake pad inserts for Origin8 Vise MTB cartridge brake pads
- Advanced alloy rim braking compound provides superior performance in both dry and wet conditions
- Automatic toe-in alignment
- Cantilever and V-brake compatible
- Brand Compatibility: Universal
- Length of Pad: 70mm
- Pad Color: Black
$6.99
B-1 Replacement Brake Pad Inserts
Replacing the pads takes just minutes and is as easy as removing the pin, sliding out the old pad, refitting the new pad and replacing the cotter pin
Page 1 of 39
Next page