Cables

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

The Elite Sealed Shift Kit uses a continuous liner that seals the system completely protecting it against dirt, mud and other contamination. Available in three colors, this system offers the ultimate combination of protection and low-friction performance. To ensure the best possible performance, we've paired Elite Polished Ultra-Slick inner cables with our improved Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability. - The continuous liner running from the levers to the derailleur offers outstanding protection from dirt and debris - Elite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize friction - Lightweight XEX shift housing is nearly 30% lighter than traditional shift housing - 5.0mm shift housing and 1.9mm inner liner may not be compatible with all frames and components What's Included: - 1x 3200mm XEX Shift Housing - 2x 2300mm STS-EL Elite Polished Ultra-Slick Shift Inner Cables - 2x 2225mm Slick-Lube Liners - 2x LEX-SL 4mm Shift Housing Segments, 300mm - 4x Open Brass End Caps - 7x Open Alloy End Caps for 5mm Housing - 2x Open Alloy End Caps for 4mm Housing - 2x Pro Indexed Inline Adjusters (4mm/5mm) - 2x Housing Connectors (4mm/5mm) - 2x Cable Tips - 2x Grub Seals - 2x 5G Tube Tops - 2x Rotating Hooks

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 1600mm liners

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the Road Elite Link Brake Kit

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm

Replacement parts for Jagwire's Elite Link kits keep things functioning as intended. - Extra links for long housing runs or replacing damaged sections - 20 links at 10mm of length each

Keep housing, hose, and electronic wires tidy with Jagwire Wire Hooks. - 4mm / 4mm hooks - Connects 4mm shift housing or dropper housing, to 4mm E-bike control wire - Pack of 4 hooks

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.5mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm

Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance. The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - Ultra-slick polished inner cables minimize system friction - Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing - Includes enough housing and end caps to reach a rear derailleur or internally geared hub on a typical frame - Bikes with extra-large frames or unusual cable routing may need additional links and/or liners; service parts are available separately

Jagwire Mini Combo Boxes contain needles and compression bushings for many common hydraulic disc brakes. - Includes a variety of common fittings for a range of disc brakes from SRAM, Avid, and Shimano

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.1mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hope brakes and includes enough hardware for one bicycle. Compatible with the following Hope brakes: - Tech 3 X2 - E4 - V4 - Race Evo X2 - E4 - M4 - Tech Evo X2 - M4 - V2 - Race X2 - Tech X2 - M4 - V2 - Mini - Mini Trials - Mono Mini - Mono M4 - 6TI - Moto V2 - M6 - Hope Banjo

Open end caps have no o-ring or nylon ring. - Step-down design mates 5mm housing with 4mm stops - Material: chrome-plated steel - 100-pack

Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Small flange for smaller hydraulic loops - 50-pack

Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake - Black

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed adjustment for braided shift housing - Not recommended for use with brake systems - Size: 4.5mm

Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

Extend housing runs using these double-ended junction end caps.

Jagwire's Universal Cable Tips are crimp-on aluminum caps for finishing the ends of 1.8mm and smaller diameter cables. They prevent the cables from fraying and come in colors to add style to your ride. Choose from two color mixes in bottles of 30.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Single end cable features weld-cut for easy installation

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - SRAM/Shimano - Slick cables are die-extruded for smooth operation - Pre-stretched - Color: Silver - Quantity Included: 1 - Diameter: 1.5 mm

Mountain Pro Quick-Fit kits allow the easy installation of Jagwire hose with Shimano disc brakes. Kits contain enough hardware for both front and rear brakes. - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation - Compatible with: Shimano Deore M596, M615

DIY Kit Includes: - Housing and Shift Cable - End caps and cable tips - Compatible Shimano/SRAM Specs: - Cable Material: Galvanized - Intended Use: Road/MTB - Cables & Housing Comp: Shimano/SRAM - Housing Length: 2000mm

Jagwire's flexible shift housing is used for the rear housing segment with Shimano Shadow-type road rear derailleurs to give optimum shifting performance and the flexibility needed for wheel installation and removal. - For use with Shimano Shadow type road rear derailleurs, such as RD-R9100, RD-R8000, and RD-R7000. - 4mm low-compression CGX-SL housing construction. - Includes 10x sealed end caps and 10x 4mm/4mm housing connectors

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame