Cranksets

- Bash guard protects chainring from logs, rocks and other trail hazards - Designed and manufactured in the USA from 7075-T6 aluminum alloy - See wolftoothcycling.com for mounting tips - 51g (26-30t)

- One-piece chromoly crankset - 24TPI - Length: 175mm - Weight: 997g

Super strong and ultra durable, Shimano's ZEE Cranks are tailor-made for aggressive riders, DHers and dirt jumpers that don't have endorsement deals. They use a 2-piece design with solid aluminum arms as well as a steel axle and steel pedal inserts for longevity. Stiffness was put at a premium, so if you need to stomp on the pedals to get up to speed quickly, or if you're a Clydesdale who punishes lesser cranksets, ZEE has your back. It's 10-speed compatible and is equipped with a 36-tooth chainring. The bottom bracket is included, too.

Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T

SRAM's Rival 22 performs on par with more expensive cranksets, but at a bargain value. The crankarms are hollow and forged from 6066 aluminum for maximum strength with minimum weight. Because lightness is nothing without toughness, the Rival crankset proudly boasts SRAM's X Glide R chainrings that are specifically designed for use with the Yaw front derailleur. Durability and reliable shifting are your allies with Rival 22.

The RIDE crank arm set offers CINCH versatility, adaptable chainring options, and the 24mm EXI interface system for easier installation and removal. This set is a budget-friendly option with signature RaceFace styling, performance and craftsmanship. - Offers CINCH system compatibility - 24mm EXI interface for easier crank installation - Forged from 6066 aluminum with aggressive styling for a high strength to weight ratio - Compatible with CINCH direct mount alloy or steel rings - Direct mount chainline: 78.5mm / 85mm (Flipped Ring) - 2X Cinch spider chainline: 77mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 190/197 Hubs - Crank Intended Use: Fat Bike - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No

• Adjustable aluminum chain guard • Fits front chainrings from 38T to 48T • Multiple clamp options fit seat tubes from 25.4 to 34.9mm • Black anodized finish

- AL6061-T6 crank with steel chainrings - 7/8sp compatible - 177mm Q-factor - 48.5mm chainline

- Series: SORA - Crank Construction: 2-piece crank construction - Bottom Bracket: BB-RS500, BB-RS500-PB - Chain Line: 43.5 - 9-speed - Four-arm BCD

- SO-2995: hex-type steel crank fixing bolt set with integrated plastic dust cap

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with the widest gravel tires

Take control of your crankset with complete modularity from ROTOR's new ALDHU cranks. These streamlined cranks combine an innovative modular structure with top-tier 7075-aeronautic grade aluminum, allowing you to adjust your axles and chainrings to individually customize your ride based on your needs, and your bike's standards. It begins with the 3D+ CNC machining to ensure unmatched rigidity from spindle to chainrings so you can take control on the roughest roads. The ALDHU is available with two different 30-millimeter spindle options that offer stiff power, and room for rim brakes or disc brakes. A wealth of crank-arm lengths allows you to optimize your power, while OCP Mount technology lets you further fine-tune your ride with Q rings. The ALDHU’s proprietary, patent-pending design is based on the modularity of each crankset component. The ALDHU's name comes directly from our racing heritage. It is an abbreviation of Alpe d’Huez to commemorate ROTOR’s first iconic victory at the Tour de France with Carlos Sastre. - Modular 7055 aluminum arms with exceptional stiffness-to-weight ratio - OCP direct mount rings allow the rider to configure to their optimum chainring position for maximum power transfer - Axle spindle, spacer, DM rings (1x/2x) and bottom bracket options available separately - Optional 4x110BCD spider available, use RR-2520

- Super compact Adventure design allows for smaller more ideal ring sizing - Modular crankset: choose your chainring sizes - Cold forged 6061-T6 aluminum arms for extra strength with 24mm steel spindle - Shimano 10/11 speed compatible -*Chainring sold separately. 110BCD outer and 74BCD inner - A 68/73mm external bottom bracket with sealed cartridge bearings is included

- Forged aluminum arms with JIS square spindle taper (129mm BB sold separately) - Super Fluid Drive riveted steel rings - 50mm chainline - 1107g

CADET & CADET-HD | Updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of XC and trail riding. The Heavy Duty version is for those who tend to take the more rowdy line. So we reinforced the HD arms to take more of what you throw at it. - The Gen2 cranks (HD) Heavy Duty version is for those who tend to take the more rowdy line - Reinforced, solid forged arms with M30 (30mm drive/28mm non-drive) aluminum spindle - Use 0mm offset ring = 55mm, 3mm offset ring = 52mm, 6mm offset ring = 49mm chainline - 3-bolt direct mount ring interface - Weight without BB or ring: 640g - Unauthorized online sales prohibited by manufacturer *M30 BB sold separately, use PX-9040 for English 68/73mm, PX-9012 for BB30/PF30 or PX-9013 for BB92

Inspired by the six victories of our athletes at the legendary Cape Epic, we thought it was only appropriate to name our lightest and stiffest crank ever after our most successful mountain bike race to date — and thus the ROTOR Kapic was born. Arguably the most prestigious marathon stage race, the Cape Epic sends riders into grueling, rocky climbs, forested singletrack, and rock-laced descents that require a crank that delivers stiffness and control that won't waiver under pressure, and we've crafted the Kapic to do just that. Much like our popular Hawk Crankset, the new Kapic is designed with an innovative modular system that allows you to select each crank component individually, based on your unique bike setup and your own physical characteristics. It features the same spline interface as the Hawk, so you can utilize the strength of Hawk chainrings, but combines with a weight-saving Kapic spindle to lighten your ride, and lighter crank arms for almost a half-pound of weight savings when compared to the Hawk. We designed the Kapic with Direct Mount technology that features a spline interface that connects the crank arm, axle, and chainring, allowing simple assembly and disassembly of your crankset. This enables you to choose the perfect chainring size for each ride, and easily remove and install a chainring with a single bolt. But the versatility of Direct Mount doesn't stop at modularity, it also enables us to employ Optimal Chainring Positioning (OCP), which, when combined with a Q ring, allows you to adjust your chainring position a single degree at a time to precisely configure your crank for maximum power and comfort. Crafted using expert CNC processes, KAPIC is built from 6082-aeronautic-grade aluminum, and includes our Trinity Drilling System, with three internal holes from axle to pedal, giving the dual benefit of an exceptionally light crank with superior stiffness to handle the toughest of MTB routes. The Kapic has been designed to mirror the strength, agility, and speed of Africa's fastest land mammal, so you can soar down the singletrack like a cheetah sprinting after its prey. To pay homage to the home of the race, we gave the Kapic bold aesthetics and iconic patterns that symbolize the geometric designs of tribal Africa. Weight: 365g (170mm arms only), 545g (170mm crankset, boost axle, 32t chainring, and boots) - Ultralight, modular 6082 aluminum arms with exceptional stiffness to weight ratio - OCP direct mount rings allow the rider to configure to their optimum chainring position for maximum power transfer - Axle spindle, spacer, DM ring, and bottom bracket options are available separately - Due to the inset bore location of the pedal threading, some flat pedals with a large inboard bearing may not be compatible with the crankset or crank boots

- Steel chainring with forged alloy crank arms and double chainguard - Compatible with 3/32" chains - 45mm chainline - Spindle Type: 118 SQR JIS

- Forged steel - 24 TPI

- 8-speed Road crankset - Square taper interface - Does not include BB - Bolt pattern: 110 x 5-bolt - Crank length: 170mm

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 49.0mm chainline

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

Strength is how the X01 Eagle DUB crankset takes capability to places never before reached. It's the strongest crank in the entire Eagle ecosystem, and it holds this status at a weight that is hard to fathom. It features industry-proven and rider-beloved DUB technology to radically simplify the relationship of spindle to bottom bracket, delivering unprecedented simplicity, compatibility, and durability. The X01 Eagle DUB Crankset also comes with our Eagle Colorsystem, in the X01 master colorway—to go perfectly with all other available cassette and chain colors from Black to Gold to Rainbow, and now Copper. All this with a raw aluminum finish on the X-SYNC 2 chainring teeth to keep looking fresh throughout its long lifespan. - The strongest crank in the entire Eagle ecosystem - Master X01 colorway as part of Eagle Colorsystem—goes with all cassette and chain color options - Available in the X01 master colorway and Oxy Red X01 signature colorway - Raw aluminum chainring teeth keep the crank looking fresh throughout the entire lifespan of the precision CNC-machined direct mount ring

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Self-extracting

Continued development of our popular crankset has led to the EVO Edition, a benchmark for aluminum MTB cranks. The latest FEA analysis tools, rigorous lab testing, and extensive field testing mean the EVO crankset is both lighter and stiffer than the previous model. Now featuring a self-extracting axle/arm interface, simplifying fitting and removal. And all proudly designed, tested, and manufactured in Barnoldswick, UK. - 15% lighter and stiffer than the previous model - Now featuring a self-extracting axle-to-arm interface, simplifying fitting and removal - Forged and CNC machined 7075 series aluminum alloy crank arms - Unique expanding spline/arm interface - Versatile Spline mount for chainring/spider - 30mm oversized axle - Weight: 641g (arms, axle, and 34 tooth spiderless ring)

- Duraluminum alloy outer bolt set with Torx T30 fitting, wrench included

The Cane Creek eeWings All-Road titanium crankset offers superior stiffness, durability, and weight savings. This slimmer crank is specifically designed to take on road, gravel, and cyclocross configurations. - 20%-30% more stiff than premium carbon cranks, while remaining in the same weight range - Includes CNC machined aluminum bottom bracket preload adjustment ring - 30mm spindle is compatible with the following bottom brackets: BSA68mm, PF86, BB30 (External Bearing Only), PF30 (External Bearing Only), and 386EVO - 160mm Q-Factor - Backed with a 10-year limited warranty - eeWings Tie-Dye cranks are made from the same high-grade titanium as the standard eeWings cranks and are hand-finished in a blue to purple tie-dye color giving each crank a unique character - Changes and wear to the color are expected as the cranks are ridden and will not be covered by the warranty - An optional clear adhesive surface protector will be included in the box to help ensure that the finish lasts over the course of regular use Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 Road Disc Hubs > 415mm Chainstay, 135/142 Road Disc Hubs < 415mm Chainstay - Crank Intended Use: Road, Gravel, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: BB30/PF30 , 386 EVO , RaceFace/Easton CINCH - Chainring BCD: Direct Mount SRAM - Weight: 395 - BB Included: No

The newly redesigned All-Mountain Guide is the love child of two innovative and revered product lines, the 1x and XCg. Perfectly suited to the increasingly popular all-mountain segment, the All-Mountain Guide shares the freshly updated "TR" upper guide with the 1x, and adds MRP's patented integrated skid. The All-Mountain Guide is a great choice for 5-6" travel bikes when used with the latest tensioned rear derailleurs or on its own for shorter-travel trail bikes or hardtails that require bash protection. The contact-free, "upper-only" chain retention means the All-Mountain Guide will be virtually silent and completely drag-free when pedaling. The patented integrated skid will protect your crank and chainring and prevent the chain from ever contacting and potentially damaging your expensive frame. - Perfect for "clutched" 1x10 and 1x11 drivetrains, as well as those using chain-retaining rings (like our Wave Ring) - New nylon integrated skid protects chainrings and glides over rocks and obstacles - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - Available in 28-32t and 32-38t sizing - All install and adjustment operations possible with just a single 4mm HEX wrench. - Compatible with chainlines 49mm and wider