Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranksets

Sunlite Cottered Pin
$2.39
- Sunlite Cottered Pins
Race Face Alloy Crank Spindle Spacer
$2.99
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.25
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Wheels Manufacturing Inc. 30mm ID Crank Spindle Spacer
$4.50 - $6.25
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
Race Face M15 bolt for 2008+ Evolve and Ride
$4.55
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
Race Face Chainring Bolt Pack Set of 4 12.5mm Bolt/Nut
$4.99
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
Origin8 3.5mm Chainring Spacers
$5.59
Spacers to insure proper chainline and chainring spacing on your bike. - 3.5mm thick - Material: alloy
Race Face CINCH Puller Cap with Washer 18mm XC/AM
$6.99
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Origin8 Double/Triple Chainring Bolts
$7.19 - $19.39
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
Origin8 Single Chainring Bolts
$7.99 - $21.00
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
Origin8 Thruster 2x Chainring Bolt Set
$8.79 - $10.79
- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Material: Steel - Type: 2x
Race Face Cinch Direct Mount Lockring
$8.99
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
FSA BB30 Crank Bolts
$9.00
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
Race Face 2008+ Next SL and 2012+ Atlas Crank Bolt/Puller
$9.00
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
e*thirteen by The Hive ISCG Mounting Bolt Kit
$9.95
- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications
Race Face CINCH Bolt with Washer 18mm XC/AM
$9.99
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
Race Face Carbon Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
Race Face Next SL G4 Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Sunlite One-Piece Crankarm
$9.99 - $15.00
• Forged steel • 24 TPI
WeThePeople Legacy Crank Bolt
$9.99
Replacement crank bolt for WeThePeople's Legacy crank.
FSA 30mm Crank Bolt with M30 Cap
$10.00
- M30 cap with self-extracting crank bolt and washer - Compatible with 2013 and newer FSA Gossamer cranks
Race Face Alloy Crank Boot
$10.00
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
SRAM Carbon Crank Arm Boot
$10.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
Sunlite Mini Hex Crankset
$10.00 - $20.00
• Compatible with mini hex chainrings
Wheels Manufacturing Inc. Crank Spindle Spacer
$10.30
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Wheels Manufacturing Inc. 29mm ID x 0.5mm Crank Spindle Spacer, Bag of 10
$10.75
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin
Wheels Manufacturing Inc. 29mm ID x 1mm Crank Spindle Spacer, Bag of 10
$10.75
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 1.0mm thick - 10 spacers per bag - Machined engineering-grade Delrin
Origin8 Thruster Crank Arm Tip Protectors
$10.79
Crank arm tip protectors for Origin8 Thruster Crank Arm Tip Protectors fit all Thruster Series MTB, Boost, and Fat cranksets. Grab a pair to protect your crank arm tips from abrasions and impacts.
Sunlite Steel Cotterless Crankarm
$10.79
• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Cotterless
TruVativ M15/M22 GXP Crank Arm Self-Extracting Bolts
$10.80
TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included
Race Face Torx Chainring Bolt/Nut Pack (Double Ring)
$10.99
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
SRAM Carbon Crank Arm Boots
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
Origin8 0.6mm Chainring Spacers
$11.99
Spacers to insure proper chainline and chainring spacing on your bike. • 0.6mm thick • Sold in a bag of 20 spacers
Race Face Crank Arm Outer Tab Spacers (Set of 4)
$11.99
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
e*thirteen by The Hive Chain Guide Idler Pulley
$12.95
- Service parts for E-13 chainguides - Fits: 06+ single ring guides
e*thirteen by The Hive Chain Guide Lower Slider Kit
$12.95
- Lower slider replacement parts for E-13 chainguides
Sunlite Cotterless Unicycle Crankarm
$12.99 - $17.99
• Forged steel • Square taper • Compatible with 9/16" pedals • Pairs • Cotterless
Sunlite Aluminum Crankarm (Left)
$13.99 - $16.00
• Square taper interface • Only includes left crank
e*thirteen by The Hive Spider Lockring
$14.95
- Stainless steel chiainring/spider lockring for all e*thirteen cranks that use the Quick Connect Direct Mount System - Requires e*thirteen spider lockring tool. Use QBP part # TL0212
SR Suntour XCT Left Crank Arm
$15.00
SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.
Wheels Manufacturing Inc. Crank Spindle Wave Washer
$16.50
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
Wheels Manufacturing Inc. Freewheel/BB Spacer
$16.50
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Easton Asymetric CINCH Spider
$16.99
- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke - Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool
Easton Chainring Bolts
$16.99
- Chainring bolts for double cranks - Torx heads
Shimano Crank Bolts
$17.00
- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles
Sunlite Aluminum Low Profile Crankarm (Left)
$20.00
• Square taper interface • Only includes left crank • 175mm length
Sunlite Aluminum Low Profile Horizontal Square Crankarm (Left)
$20.00 - $20.99
- Horizontal square interface - Only includes left crank
TruVativ BMX To Threaded (BSA) BB Adapter
$20.00
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
Wheels Manufacturing Inc. 46mm ID Bottom Bracket Spacer Pack
$20.00
These are 46mm inside diameter cup spacers that fit between a bottom bracket cup and the frame. Machined from 6061 aluminum and anodized black, these spacers can be used for a few different scenarios. First, when used with a Wheels Manufacturing GXP compatible bottom bracket, adding cup spacers between the non-drive side cup and the frame will move the chainrings on a GXP crank closer to the frame (reducing the chainline). Second, for Specialized road frames with the 61mm wide Carbon OSBB shell, you would place 3.5mm of spacers between each cup to effectively widen the BB shell to 68mm when used with non-Specialized cranks. One bag will properly space one 61mm wide Specialized OSBB shell to 68mm. Specs - Bottom Bracket/Frame Interface: Any 46mm ID BB shell: PF30, Specialized Carbon OSBB, 386EVO, 392EVO, BBRIGHT - Inside Diameter: 46.20mm - Outside Diameter: 52.00mm Bag Includes: - 2.5mm bottom bracket cup spacers (46mm ID) x 2 - 1.0mm bottom bracket cup spacers (46mm ID) x 4
Shimano Tourney TY501 Crankset
$23.99 - $37.00
The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly
SR Suntour XR-T Crankset
$25.00
A triple crankset with melt-forged arms and non-replaceable chainrings that is compatible with square taper bottom brackets. - Alloy crank arms - Steel chain rings - 48mm chain line with a 122mm spindle - Integrated chain guard - Chainrings are not replaceable - Number of Chainrings: Triple - Chainline/Hub Compatibility: 135/142 MTB Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 48/38/28 - Spindle Interface Type: Square Taper JIS - Drivetrain Speeds: 7 - Chainring BCD: Riveted - BB Included: No
Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$26.00
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Shimano STEPS CITY E6000 Left Crank Arm
$27.00
- Replacement left-side crank arm for Shimano STEPS CITY E6000
Shimano STEPS CITY E6000 Right Crank Arm
$27.00
- Replacement right-side crank arm for Shimano STEPS City E6000.
Dimension Cruiser One-Piece Crankset
$28.00
Dimension Cruiser one-piece hot-forged chromoly steel cranks. - One-piece, hot-forged chromoly steel crank - Cruiser chainwheels sold separately - Requires 24 tpi American bottom bracket - Crankset has 1/2-inch pedal threading
FSA ISIS Crankarms
$28.99
FSA ISIS eBike replacement crankarms.
FSA JIS Crankarms
$28.99
FSA JIS Square Taper eBike replacement crankarms.
Sunlite Big City Single Speed Crankset
$28.99
- Steel chainring with forged alloy crank arms and double chainguard - Compatible with 3/32" chains - 45mm chainline - Spindle Type: 118 SQR JIS
Wolf Tooth Components CAMO Direct Mount Spider for Cannondale
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Cannondale cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M4 (minus 4mm - dished toward the frame): For Cannondale bikes with the Ai (asymmetric integration) offset rear triangle AND all Cannondale 27.5 Plus bikes - M9 (minus 9mm - dished toward the frame): For standard (non-Ai offset) bikes - M1 (minus 1mm - dished toward the frame): For the Fat CAAD only
Wolf Tooth Components CAMO Direct Mount Spider for Race Face Cinch
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
Page 1 of 5 Next page