700c, 27-Inch & 650c

- Ultralight 28mm Gravel for a smooth, responsive ride
- Convergence Rim Technology increases vertical compliance allowing the wheel to absorb bumps, vibrations and impacts from the terrain, enhancing stability and control in challenging riding conditions
- Sinuous profile spoke face aligns the nipple seat to the spoke angle
- Reinforced nipple bed is resistant to spoke pull-through
- Solix hubs have a five-pawl freehub quietly integrating with a 121 tooth drive ring for 605 points of contact translating to an ultra-fine .59° engagement
- Sapim CX-Ray spokes

Proterra Light i25 wheels are for all you gravel riders out there. Proterra Light i25 wheels feature an open-cavity profile to minimize weight and maximize efficiency as you get lost out where the pavement ends. Like all other Proterra wheels, the responsive 6-pawl freehub offers 5 degrees of reliable engagement whether you're crushing a gravel ride or have your frame bag bursting at the seams for an overnight adventure. - Frequency Hub with top-tier EZO bearings - 25mm TCS Tubeless compatible rims with 3-cross lacing and alloy nipples, hand-built in California - Solid rim strip and TCS tape included

Proterra Light i25 wheels are for all you gravel riders out there. Proterra Light i25 wheels feature an open-cavity profile to minimize weight and maximize efficiency as you get lost out where the pavement ends. Like all other Proterra wheels, the responsive 6-pawl freehub offers 5 degrees of reliable engagement whether you're crushing a gravel ride or have your frame bag bursting at the seams for an overnight adventure. - Frequency Hub with top-tier EZO bearings - 25mm TCS Tubeless compatible rims with 3-cross lacing and alloy nipples, hand-built in California - Swift 6-pawl freehub and 5 degrees of engagement - Solid rim strip and TCS tape included

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high-pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. Countless Configurations CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately. Why Choose CZR i23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases.

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. COUNTLESS CONFIGURATIONS CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page. WHY CHOOSE CZR I23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.

The Disc version of the Team30 brings an affordable semi-aero wheelset to the latest generation of disc brake-equipped bikes. Construction is very similar to the rim brake Team30, with 30mm deep aluminum rims and CNC machined hubs with sealed cartridge bearings. Disc brakes put very different loads on wheels than rim brakes, so the Team30 Disc is beefed up with more spokes 24 front, 24 rear. 2-cross lacing at the front and a mix of 2- and 3-cross at the back deals with the torque demands of disc brakes. - Tubeless Ready / Clincher Alloy 30mm depth rim - CNC machined aluminum hubs - Sealed cartridge bearings - Aero bladed DP spokes

Team 30 Comp 700C Wheelset - Alloy 30mm section clincher rim - CNC braking surface - Artisan built, entirely by hand - Includes QR-22, rim tape and spoke protector - Manufacturer claimed weight of 1820g

The Vision Team 30 i23 TL Wheelset is a reliable and versatile option for gravel and all-road riders. Built with a tubeless-ready design and a wide internal rim width, it supports modern tire profiles for improved traction and comfort. This wheelset is engineered to handle mixed terrain with confidence, offering a balance of durability, efficiency, and control for adventurous riding.

30mm deep rims
Tubeless-ready for gravel and road
Centerlock disc brake interface

The Disc version of the Team 35 brings a semi-aero wheelset to the latest generation of disc brake-equipped bikes, featuring a 35mm deep alloy rim that's Tubeless ready and laced to disc brake hubs. - Alloy 35mm depth rim, Tubeless ready - clincher compatible - Center-Lock Disc brake hubs with sealed cartridge bearings - Laced with round spokes, Artisan built, entirely by hand

The Trimax 30 offers a great workhorse wheel for all around use. It has a wider rim profile to allow for a comfortable ride and is tubeless ready. The unique intespoke milling helps reduce weight to increase acceleration and easier climbing. Add in the fully adjustable P.R.A. hub and aero bladed spokes to these hand built wheels and you have a wheel ready to take you anywhere you want to go. - Alloy 30mm depth tubeless ready/clincher rim - Interspoke milling R06 system - 6 sealed cartridge bearings (2F+4R) - 2:1 aero bladed spokes 21F / 24R - Artisan built, entirely by hand - Includes QR-93

The Vision Trimax 35 offers a lightweight combination alloy rim. With a wind cutting 35mm depth, and a bump softening width of 17mm, this wheelset is a true winner. Aero bladed spokes to these hand built wheels and you are in for a smooth ride no matter if you are on the flats or in the hills, or anywhere in between. - Alloy 35mm section clincher rim - Interspoke milling R06 system - Anodized silver CNC braking surface - Aero bladed spokes - Includes Alloy QR-65 and spoke protector - Artisan built, entirely by hand

• Full carbon rim • 91 mm depth rim • 2 sealed cartridge bearing • ABS self locking nipples • Artisan built, entirely by hand

The SC wheel range stands as a cornerstone in Vision’s product line-up: premium carbon wheels inspired by the pro-level Metron series, offered at an incredibly competitive price point. The SC 45 SL fully embrace this philosophy. An evolution of the previous SC models, now featuring a 23 mm internal rim width for improved compatibility with wider tires and enhanced stability, along with a brand-new P.R.S. hub with a 54-tooth ratchet system for faster, more efficient power transfer derived from our top-of-the-line Metron technology. Performance, reliability, and value – all in one perfect choice.

Full carbon 45mm deep rims
2:1 aero bladed spokes 21F / 24R
Tubeless Ready, 23 mm inner width rim
V-600 P.R.S. hub with a 54-tooth ratchet system for faster, allows for more efficient and precise power transfer derived from our top-of-the-line Metron technology
6 sealed cartridge bearing (2F + 4R)
Artisan built, entirely by hand

- Performance and durable wheelset for road/gravel use
- Aero 48mm deep, hooked carbon disc rim (31.3mm outer/25mm inner width) with a tubeless ready profile
- Center Lock V-200 hubs laced with aero bladed spokes

The SC wheel range stands as a cornerstone in Vision’s product line-up: premium carbon wheels inspired by the pro-level Metron series, offered at an incredibly competitive price point. The SC 60 SL fully embrace this philosophy. An evolution of the previous SC models, now featuring a 23 mm internal rim width for improved compatibility with wider tires and enhanced stability, along with a brand-new P.R.S. hub with a 54-tooth ratchet system for faster, more efficient power transfer derived from our top-of-the-line Metron technology. Performance, reliability, and value – all in one perfect choice.

Full carbon 60mm deep rims
2:1 aero bladed spokes 21F / 24R
Tubeless Ready, 23 mm inner width rim
V-600 P.R.S. hub with a 54-tooth ratchet system for faster, allows for more efficient and precise power transfer derived from our top-of-the-line Metron technology
6 sealed cartridge bearing (2F + 4R)
Artisan built, entirely by hand

The Metron 60 SL TL is Vision’s Aero Stage Race wheelset. The Metron 60 is the one wheel you’ll ride once and won’t want to ride without again; it sits comfortably in the mid-range of Vision’s Metron rim depths and offers the most versatility in the line up. - Full Carbon wheelset produced with Vision reliability and high-performance technology - Tubeless ready design, with tubeless valve and rim tape included - 60mm depth and 21 mm inner width - P.R.S. alloy hubs with 6 sealed cartridge bearing (2F + 4R) - 21 spoke front, 24 spoke rear, 2:1 laced, Aero bladed straight pull spokes and ABS locking spoke nipples - Artisan built, entirely by hand - Includes spoke protector, cassette spacer, and wheel bag

The Metron 45 SL TL Disc is the tactical wheelset essential to your quiver. The Metron 45 is an “all-around” wheelset built to take you from climbing all the way to gravel or CX. Victorious on the Cyclocross course, the cobbles of the spring classics, and the torturous mountain stages in the Pro peloton, this wheelset can handle whatever you put them through. - Full Carbon wheelset produced with Vision reliability and high-performance technology - Tubeless ready design, with tubeless valve and rim tape included -45mm depth and 21 mm inner width - P.R.S. alloy hubs with 6 sealed cartridge bearing (2F + 4R) - 21 spoke front, 24 spoke rear, 2:1 laced, Aero bladed straight pull spokes and ABS locking spoke nipples - Artisan built, entirely by hand - Includes spoke protector, cassette spacer, and wheel bag

The Metron RS 45 (Racing Series) full carbon wheelset is designed to go fast. Behind every Metron RS lies a process of engineering and perfection like no other. From CFD design to wind tunnel testing and meticulous manufacturing to extreme performance trials, these are not just wheels, they are the ultimate expression of Vision’s technology and performance. Built with full-carbon 45mm deep rims, carbon spokes and the new V-1000 hub with PRS technology, the Metron RS is designed to win.

Full carbon 45mm deep rims
2:1 aero bladed carbon spokes 21F / 24R, ABS self-locking nipples
Tubeless Ready, 23 mm inner width rim
P.R.S. hubs with Helical Clutch ratchet featuring 72T for a faster 5 degree engagement angle, and increases durability all while reducing loss of power engagement under load
6 sealed cartridge bearing (2F + 4R)
Artisan built, entirely by hand, coupled with state-of-the-art manufacturing processes

The Metron RS 60 (Racing Series) full carbon wheelset is designed to go fast. Behind every Metron RS lies a process of engineering and perfection like no other. From CFD design to wind tunnel testing and meticulous manufacturing to extreme performance trials, these are not just wheels, they are the ultimate expression of Vision’s technology and performance. Built with full-carbon 60mm deep rims, carbon spokes and the new V-1000 hub with PRS technology, the Metron RS is designed to win.

Full carbon 60mm deep rims
2:1 aero bladed carbon spokes 21F / 24R, ABS self-locking nipples
Tubeless Ready, 23 mm inner width rim
P.R.S. hubs with Helical Clutch ratchet featuring 72T for a faster 5 degree engagement angle, and increases durability all while reducing loss of power engagement under load
6 sealed cartridge bearing (2F + 4R)
Artisan built, entirely by hand, coupled with state-of-the-art manufacturing processes

- Great for track racing, training or hardcore street use
- 30mm Deep-V rims
- Non-machined sidewalls and black stainless spokes, bolt-on front and rear hubs in black, flippable fixed/free rear with lockring, 120mm spacing for the rear

Today’s road and gravel tires have evolved. Yesterday’s slow-rolling 23mm tires and energy-robbing extreme air pressures have been replaced with wider, faster, and more comfortable tire designs. The Grail CB7 is the first rim built specifically around this new breed of tire. The Grail CB7 proves that smoother is faster by combining lateral stiffness with a soft riding feel. That special ride is about more than just comfort. Decreased resistance from road impacts and less shoulder and arm fatigue means more power to the pedals and a faster rolling wheelset. - 300g rim design optimized for tubeless tires and disc brakes - RiACT rim shape and carbon lay-up absorbs vibrations to give you the best ride possible - 21.6mm internal rim width for more stability and control with all tires - Tubeless ready with rim tape and valves installed - Patented BST tubeless rim inflates easier and offers a more secure tire fit - Optimized for lower pressure 25-40mm disc road, gravel, and cyclocross tires - Includes 12mm end caps

Sta Tru Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27" - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 630 / 27" - Tire Type: Clincher

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Tire Type: Clincher

Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher

Sta-Tru Wheels ST735 silver anodized alloy single wall rims - Hybrid rim with an attractive rim profile developed for Sta-TruWheels, Inc - KT ATB 9mm/100/108 axle - Silver stainless spokes

Silver anodized alloy rim w/ 32 holes - KT silver alloy road hub - Stainless steel spokes - QR wheel

Tom Ritchey believes in high quality aluminum road wheels—they offer incredible performance and durability that’s hard to beat at any price. He redesigned the critically acclaimed Zeta to be wider, lighter and laterally stiffer—perfect for a great road riding experience, yet still tough enough to endure gravel road rides and cyclocross races that would chew lesser wheels to pieces. Combining decades of historic ride-proven research and testing with modern standards, the Zeta is now available in a tubeless-ready Comp-level version, offering the legendary Ritchey ride quality at a more attainable price. Each Ritchey wheelset is hand-built by a qualified Ritchey wheel technician. Inner rim width: 20mm Outer rim width: 25mm Suggested tire size range: 25-45mm

While the WCS Zeta GX wheels might be a new product for Ritchey, one could argue their development has been in process for nearly 50 years. Tom, often together with his mentor Jobst Brandt and other friends, has been blazing trails and riding rough stuff since the early 1970s. Riding dirt is literally in Tom's blood. Directly inspired by the reliability and top performance of the original Ritchey Zeta wheels, the new WCS Zeta GX wheelset is designed to shine in the gravel. These hand-built wheels are tubeless-ready and feature the new WCS hub with sealed bearings, and center-lock rotor mounts – with the rear hub housing a precise Ratchet Driver system with 360-degree, 36-point engagement. The rims offer a wide 25mm inner diameter, so they'll nicely fit wider tires for gravel, and they're laced with 28 sturdy spokes. Tom Ritchey doesn't carry a mobile phone when he rides. Nor does he bother with the hassle of following GPS coordinates on a cycling computer. A firm believer in self-reliance, one of Tom's guiding design principals is that every Ritchey product needs to be reliable enough to get you home. Designed for durability and to perform in rough and rugged conditions in remote locations or close to home, the WCS Zeta GX wheels are built to be strong, dependable, and ready to rip, carve, and cruise through all of your gravel adventures – and reliable enough to make sure you can do it all again tomorrow. Rims: 6066 alloy Tubeless Ready with tubeless tape applied - OCR offset Rim depth: 19mm Outer rim width: 29mm

Tom Ritchey believes in high quality aluminum road wheels—they offer incredible performance and durability that’s hard to beat at any price. He designed the Zeta to be wide, light and laterally stiff—perfect for a great road riding experience, yet still tough enough to endure gravel rides and cyclocross races that would chew lesser wheels to pieces. Updated for 2024 with a 4-pawl freewheel and DT Industry spokes, the tubeless-ready Comp Zeta Disc wheels combine decades of historic ride-proven research and testing with modern standards to deliver the legendary Ritchey ride quality at a more attainable price.

Some of Tom's favorite experiences have been while pedaling his tandem all over the world with his wife, Martha. When he designed the new Outback TandM Break-Away, he wanted a wheelset that could withstand the rigors of riding tandems along varying surfaces. The result is the new Comp Zeta TandM wheelset. The Comp Zeta TandM wheels build upon all the advantages of the original Comp Zeta Disc wheels but include some tandem-friendly features. The quick-release disc hubs measure 100mm wide for the front and 145 in the back and are laced with beefier spokes and brass nipples to 36-hole Zeta tubeless-ready rims. Designed specifically for the Ritchey Outback TandM Break-Away frameset, the unique Comp Zeta TandM wheelset is strong, reliable, and integrates beautifully with the frameset for many miles of happy tandeming. - Tubeless-ready 6061 Alloy rim - Rim depth: 23.4mm - Outer rim width: 24.4 mm - Inner rim width: 19.5mm - OCR 3mm offset rims for reduced dish and increased strength - Hubs: forged disc hubs and sealed bearings - Freehub: steel—Shimano 10/11-sp - Axles: quick release front and rear (100mm front / 145mm rear) - Disc mount: 6-bolt - DT Swiss Champion 2.0—DT Swiss brass nipples (36 front & rear) - Lacing: 3x - Weight: 2077g/set (959g—front / 1118g—rear)