Other

Everybody needs a good knife in their backpack or tool kit. Here's a favorite of the All-City team, made by the fine folks at CRKT. It's got a clip on one side, the AC logo on the other, and is good for spreading delicious jams, making dangerous arm movements, and of course, cutting things. - Open length: 6.5-inches - Closed length: 3.75-inches - Blade length: 2.625-inches - Weight: 3.1-ounces - Blade material: Stainless Steel - Edge type: fine - Handle material: steel - Knife type: locking folder

Bar Tape Clips are simple little plastic replacements to the dreaded electrical tape that's often used to finish off wrapped bars. These clips work with one or two internal cables, either on oversized 31.8 bars (where it tapers down to 28.6) or old-school 28.6 bars.

A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options. - Water-proof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars and can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes

A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with drop bar style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Opening measures 9" across

EBike Handlebar Cover - Protects handlebars and controls while transporting on bike rack - Strong and lightweight: made of rip stop nylon with PU coating - Easy to attach: uses straps & zipper - Universal: fits handlebars to 82cm (32 inches) - Protection: Keep your expensive controls safe from the elements

Protects your Handlebars with installed mirrors, phone holders, display and calipers, from the elements. Great for protecting while on a car rack too. - Works with large or small handlebars with mirrors, lights, bells, and/or phone holders - Protects all kinds of Handlebars such as Ebikes. Road Bikes, & Mountain Bikes - Has elastic and 4 hook and loop straps to keep attached and secure - 36" x 8" Depth. It has elastic and hook and loop straps so it is very adjustable and the depth can be increase because of the hook and loop straps. It will fit almost any handlebar with phone holders, lights, and/or electronic displays.

- Universal neoprene motor cover protects E-Bike motor, drive from dust, water, & elements. - For use while in storage or transporting on car rack. NOT FOR USE WHILE RIDING. - Easy Installation with stretchable neoprene and hook and loop.

Disc Brake Covers are protecting your bike disc brakes during maintenance or transit. A must have addition for mounting your bike on a car rack and for clean up to keep your rotors clean and protected. Our Disc Brake Covers are made from breathable neoprene material that enables you to simply rinse them off and reuse them. Attaching is a snap with the 2 zippers on each cover.

Protects Your Battery From The Rain, Snow and Keeps the Battery Insulated - Insulates battery to help operate more efficiently - Protection against the elements while riding or transporting on a car rack - Scratch protection - Pocket for phone (keys or wallet) - 4mm neoprene black - Medium: Fits diameters 3.5" to 4.5" in diameter - Large: Fits surface-mounted battery and is compatible with Bosch, Shimano Steps, Samsun, Yamaha.

Insulated, flame resistant, water resistant cover for battery on E-Bike. Keeping your battery at normal operating temperatures improves performance and battery life. Also, protects the battery from rain, sun, and elements while on car rack. - Made with water-resistant nylon - polyester on outside for excellent water resistance. - Inner material made with fire and flame-resistant materials (passes FMVSS 302 Flame Test) - Fits surface-mounted battery and is compatible with Bosch PowerPack, Shimano Steps, Samsung, Yamaha - Pocket on top to keep small items close at hand. - Mounts with drawstring and hook and loop.

Ebike or Bike Cover to protect your bike from the elements. Made with 300D Ripstop Nylon with water resistant coating. Fits most ebikes, fat tire, and 29" wheeled bikes. - Cinch straps included to tighten cover against bike & heavy-duty elastic drawstring - Cover is 73” x 34” x 44” high (height at the handlebars) - Zippered opening for easy access to battery and bike - Metal Grommets to use with bike lock - Reflective handles and trim - Convenient carry bag Note: Due to the large number of vehicle makes/models, state laws, different hitch mounts, size of bikes, we do not guarantee the cover will not obstruct rear view vision. It is the responsibility of the buyer to ensure they are following state laws and mount bikes that are safe for travel.

- Fits two ebikes or a large cargo bike - Made of tough, lightweight 300 Denier Nylon with a water-resistant coating. - Zippered opening allows access to bike and battery - Metal grommets work with bike locks - Fits with front and rear bike racks - Elastic shock cord cinch strap and 2 separate long traps to tie down cover - Dimensions: 78" x 47" x 35" Note: Due to the large number of vehicle makes/models, state laws, different hitch mounts, size of bikes, we do not guarantee the cover will not obstruct rear view vision. It is the responsibility of the buyer to ensure they are following state laws and mount bikes that are safe for travel.

Completely encloses the bikes and seals at the hitch so you can rest easy knowing rain, road debris, and inclement weather will not wear on your bikes. Made Heavy Duty translucent reinforced scrim material that encloses the entire bike. Perfect for road trips for the back of your RV, Van, Truck, SUV, Trailer, or Vehicle. Fits standard and extended wheel base bikes. - Adjustable: Fits 1 or 2 bikes with adjustable straps. - Protects: Bike are safe from UV, water damage and debris. - Easy to Install: Fits almost any hitch-mounted bike rack, designed for large SUVs and RVs. Included bungee straps must be used to securely strap down extra material, failure to do so could cause unneeded air drag and cover damage. - Size: 80" (L) x 36" (W) x 50" (H) Note: Due to the large number of vehicle makes/models, state laws, different hitch mounts, size of bikes, we do not guarantee the cover will not obstruct rear view vision. It is the responsibility of the buyer to ensure they are following state laws and mount bikes that are safe for travel.

Durable: - High-quality grade materials that won't yellow or crack over time - Self-healing pellicle making small scratches disappear - Strong, durable, and very flexible materials to protect your fork from accidents, rock impact, and rub Installation: - Easy to install for a seamless installation - See our step-by-step installation video - Easy to remove and leave no residue and safe on bike paint Compatibility: - Tailored 4 pieces kit to protect your Fork from scratches or bags rub - Kit includes specifically shape self-healing pellicle for all rigid Fork - Fits all rigid fork: Ideal for CX bike, Gravel bike, tour bike or road bike - Available in transparent gloss or mat for a flawless match to your fork finish

Durable: - High quality grade materials that don't yellow or crack over time - Self-healing pellicle making small scratches disappear - Strong, durable and very flexible materials to protect your bike from accidents, rock impact and tailgate pad rub Installation: - Easy to install and comes with a professional grade squeegee for a seamless installation - See our step-by-step installation video - Easy to remove and leave no residue and safe on bike paint - Includes one premium quality 3M squeegee Compatibility: - Tailored to E-bike oversize tubing - Fits almost any E-bike or oversized mountain bike - Fork protection kit included - Available in transparent gloss or mat for a flawless match to your bike finish

- Proofide is the only substance that should be used to care for all Brooks Leather Saddles - A new saddle should be treated with Brooks Proofide leather dressing to help assist the breaking-in process - Proofide keeps the leather supple as it is specially formulated from natural ingredients to condition, preserve and shower proof the saddle

The Frame Mounting Block provides the critical connection from the Dash FM and Dash X FM to your bicycle. The mounting block is easily installed on bikes with round and oval frame tubes—simply snap the mounting rails into place, fasten the safety strap, and quickly get on your way. Pick up a spare mounting block to install on each of your bicycles for quick transitions.

Designed by Tullio Campagnolo, the BIG Corkscrew is a signature of artisanship of the Campagnolo brand and a masterpiece of functionality. 100% made in Italy by Italian craftsmen. Telescopic, self-centering bell perfectly positions the screw in the center of the cork - Screws harken back to seventies era Super Record cranks - Packaged in a collector's box - Two levers pull the cork out easily and delicately ensuring the bottle is not shaken, distubing sediment in aged wines - Designed so the screw will never completely twist through the cork, preventing pieces of cork dropping into the wine - Bronze is finished in a "vintage" hand-produced look. Satin is a great match for modern interior decor thanks to its sheen typical of steel

• Designed for flat-sided tubes up to 23mm thick • Firm spring prevents movement while riding • Two bracket options to better fit small and large frames

• Telescoping leg that offers expanded versatility to fit a wide range of bicycles • Crafted of lightweight and durable aluminum alloy • Equipped with a firm spring that prevents movement while riding • Includes a retro adapter plate

Built for Si dropouts. A durable kickstand for Cannondale Si dropouts that is stylish and smartly equipped. Where it thrives: Leisurely rides, in town What it's built for: Durability Highlights: - Stylish and sleek - Light and strong alloy construction - Flat/post brake mount compatible

Clear stick on chainstay and frame protectors.

- Axle mount - Made of steel - Fits 16-inch wheel bikes

- Axle mount - Made of tough steel construction

- Sturdy 5mm steel plate construction - Provides stability for adult riders - Fits 20-inch to 26-inch wheel bikes - EN71 and EN14765 test approved - 6-inch steel wheels for increased stability - Weight Limit 220lb / 100 kg

- Leather handle combines function with fashion - Conveniently locates a handle above bottom bracket - Made in Milwaukee, Wi from full grain leather

- Robust universal stand - User friendly - Alloy construction - Adjustable length via a twist knob

Giant's Mobility Kickstand attaches to your bike's frame at the rear dropout for convenience and easy access.

Features - E-Bike specific kickstand - Designed to handle the additional weight of battery assisted Giant bicycles - Adjustable leg assures the perfect fit for all frame sizes Fits: - Road-E - Quick-E - Dirt-E - ToughRoad GX-E - Explore-E - Vall-E - Amiti-E

INVISIBLE INFLATION Lightweight, firmly attached and quiet, but easily accessible when you need it, the Giant Clutch Fork Storage kit fits a CO2 cartridge and inflator right into your fork’s steerer tube and helps you ride pack-free. FEATURES: - Invisible until you need it - Multiple taper mounting design - Rubber mallet installation, no need for any glue or adhesive - Carries a 16g or 25g CO2 cartridge and inflator (cartridges sold separately) SPECIFICATIONS: - Tools: 16g or 25g CO2 Cartridge, CO2 inflator Sizes: 160 x 40 x 21mm - System: Compatible with RockShox & Fox & DVO Forks - Weight: 118g (with a 25g CO2 cartridge) - Material: Aluminum

RIDE FREE Ditch the heavy pack and saggy saddlebag with the all-new Clutch Crank Storage. Lightweight and right there when you need it with six allens, a chain tool, and a spoke wrench, the Clutch Crank Storage can solve just about any trail-side mechanical. FEATURES: - The smallest multi-function crank-stored tool on the market - Magnetic locking system ensures quiet, stable storage - Quickly and easily mounts in hollow crank spindle - Compatible with hollow-spindle SRAM, Shimano, and Praxis cranks - Includes 2.5 to 6mm allens, a T25 Torx, a valve core remover, spare chain links, and a spoke wrench SPECIFICATIONS: - Tools: 2.5, 3, 4, 5, 6mm Hex, T25, Chain breaker, Spare chain links storage, Spoke wrench - System: Compatible with Sram & Shimano & Praxis Cranks - Sizes: 100x 32 x 19mm (TBC) - Weight: 84g - Material: High-density plastic

The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

No graphics. No logos. Just a clean layer of protection, available in matte or gloss. Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Our Cheetah print is guaranteed to make you 20% faster and 100% feistier. The kit is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Universal kit designed to fit all bikes and sizes. Includes 6 easy-to-trim pieces for top tube, downtube, chainstays, and seat stays. - 10 mil guards protect frame from scratches, chips and shuttle/cable rub - Applying to road or gravel bike? Simply narrow pieces to desired width using scissors or exacto knife - An affordable way to customize your bike with rad designs - Made in the USA

Our Kashima gold Geo Deco design is subtly classy, just like you. Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

A modern halftone camo pattern that looks great on dark and light bikes alike! Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Mid-century modern has finally escaped the living room and gracefully landed in our newest collection, Maze Runner. It’s our classiest design yet, available in three righteous colorways across our fender, frame keeper and topcap lineup. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Taste the rainbow, kids! Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Protect your frame from impacts, nicks, and scratches. - A clear self adhesive frame protector film (roll) - Roll size: 50mm x 1.5m x 0.2mm (thick), 2" x 60"

Protect your frame from impacts, nicks, and scratches. - A clear self adhesive frame protector film (roll) - Roll size: 75mm x 1.5m x 0.2mm (thick), 2" x 60"

Who knows more about dog attacks that the mailman? Letter carriers have had to deal with aggressive dogs since Claudius Polonius was delivering rolls of parchment to citizens of the Roman Empire. So what do the experts use to repel dog attacks? Well, the U.S. Postal Service has been using Halt! Since 1966. You might say they have been conducting field tests for over forty years. Halt! Products use Capsaicin, a naturally occurring extract of peppers, which, when sprayed in a dog's face, causes only temporary, but extreme discomfort for the dog. Think of it as attitude re-adjustment. Halt! Stops dogs in their tracks, giving you time to move out of danger. Halt's pressurized spray is accurate up to 10 feet.

Replacement part

- Accessory for the Shotgun 2.0 MTB seat - Allen key fixing for easy fitting, removal and adjustment - 250mm in length, with Pro 19mm rubber grips designed for little hands - Comes with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diameters - Suitable for flat or riser style handlebars - Your child will love riding up front when they have their own handlebars and grips to hold onto