Parts

Steel 1mm spacer fits Shimano cassette bodies - Great for 10 sp cass on 8/9 sp hubs - Also for many other fit applications

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Crank dust cap - Works with most three-piece crank models

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Chrome - Sold individually

- Routes cables underneath the bottom bracket - Will not rust or corrode

- 8x1mm Allen head

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Replacement piston and seals for Hope disc brake calipers.

Hope Brake Lever Parts

Replacement piston and seals for Hope disc brake calipers.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

The Gyro G3 upper top plate is designed for use with the G3 detangler.

- Replacement cable anchor bolt for brakes - Includes nut and washer

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

- Crown Race - Size: 27.0mm

- Type: Lock washer - Size: 1" Keyed

- w/Nut - 1-3/4-inch

- Rubber - Color: Black

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

- Crown Race MX - Size: MX TH 26.4mm

Shifting cables for Road/Mountain bikes.

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

- Aluminum straddle cable carrier for cantilever brake

Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually

FSA Mega Exo Small Parts.

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed

RockShox cable and hose guide.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit

Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each

Shimano Front Derailleur Cable Fixing Assembly

- Sunlite Cottered Pins

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

Replacement bearing for the lower half of YST8003 #7 headset.

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- MTB or Road - 1.5 x 1855mm - Galvanized

• Compatible with most side pull and center pull brakes • All weather compound

KS Dropper Post Service Parts

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length

Standard replacement star nuts for threadless steerers.

- For MTB levers - 7mm x 1mm - Aluminum construction

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.